Sony VCRplus+ SLV-D560P Operating Instructions Manual page 89

To cancel the setting
Select "Off' in step 2.
Notes
• When tile phlying signnl does not contain :1signal lkn" tile rear speakers, the surround effects
will be difficult to hear.
• When you t_ctivate tile surround effect, turn off the surround setting of the connected TV or
amplifier (receiver).
• Make sure that your listening position is between and at an equal distance from your
spe_kers, and that the speakers are located in similar surroundings.
• If you use the DIGITAL AIJDIO OUT (OPTICAL or COAXIAL) jack and set "Dolby
Digit:d" to "Dolby Digital" or "DTS" to "On" in "AUDIO SETUP" menu (page 66), sound
will come from your speakers but it will not hax e the surround effect.
• Yuu cannot perlk_rm playback quickly or slowly with sound when a virtual surround effect is
set (page 36).
0
<
0
_>
Q.
o
o
o
u_
Virtual surround setting 89