Table of Contents
Advertisement
o
.E
1-
Symptom
The timer does not operate.
A tape cannot be inserted.
Tile VCR mechanism needs to be
,_
cleaned.
,g:
6
Control by AV mouse is not possible.
Remedy
• Check that tile clock is set.
• Make sure a tape has been inserted.
• Check that the safety tab has not been removed.
• Make sure the tape is not at its end.
• Make sure a program has been set lk_rtimer recording.
• Make sure your timer settings are past the current time.
• Check that the cable box is turned on.
• The clock stops if the DVD-VCR is disconnected
from
the wall outlet for more than one minute. Reset the clock
and timer.
• Turn the power off and unphlg the AC power cord.
• Check that a tape is not already in tile tape compartment.
• Clean the cabinet, panel and controls with a dry, soft
cloth, or a soft cloth slightly moistened with a mild
detergent solution.
Do not use any type of solvent, such
as alcohol or benzine.
• The unit is not compatible with satellite TV receiver AV
UlOU se,
etc.
Symptoms caused by contaminated
video heads
• Normal picture
• Rough picture
• Unclear picture
• No picture (or
black & white
screen appears)
initial
contamination
terminal
_>
Q.
o.
Troubleshooting117
Advertisement
Table of Contents
