Table Of Contents - Berkel 250 Owner's Manual

VACUUM PACK.AGING MACHINES-OPERATION INSTRUCTIONS
TABLE OF CONTENTS
1. Setting up the machine
2. Electrical connection
3. Operation
3.1 Working principles
3.2 Special packaging
3.2.1 Gas flushing
3.2.2 Electrical bag cut (optional)
3.3 Vacuum packaging operation
3.3.1 Basics
3.3.2 Functions menu
3.3.2.1 Create a program
3.3.2.2 Delete a program
3.3.2.3 Select operating mode
3.3.3 Programs menu
3.3.3.1 Program identification
3.3.3.2 Vacuum time setting (sensor disabled)
3.3.3.3 Vacuum level setting (sensor enabled)
3.3.3.4 Vacuum plus time setting (sensor enabled)
3.3.3.5 Gas time setting (sensor disabled)
3.3.3.6 Gas flush level setting (sensor enabled)
3.3.3.7 Sealing time setting
3.3.4 Vacuum cycle execution
3.3.5 System monitor
3.4 Daily cleaning
4. Trouble shooting
4.1 Failure during a packaging cycle
4.2 Insufficient vacuum
4.2.1 Leakage in the bag
4.2.2 No leakage in the bag
4.2.3 Insufficient vacuum in the chamber
4.3 Faulty seal
4.3.1 Insufficient seal
4.3.2 No seal
4.3.3 Permanent sealing current
4.3.4 Seal does not stick
4.4 Fault in the valves
4.5 Control board failure
5. Regular maintenance
2010-08-30
6