Mode Timeout - Philips 27PT8302/37 User Manual

T te remote control that is SUl_plied wi_h your _ele-
ision may also work wid_ a variety of i_hared
comro//ed accessory devices such as VCRs. Cable
Boxes, DVD Players. Smelliw Receivers, e_c. The
f!sllowing insn'uc_ions expl, dn how to change the
remote mo&,_br the %we c_'accesso_y device you
1
Press and release the SELECT button on
the remote control, The last itsed mode bel_>re
T\_MODE will lit up ['or 2 seconds. Al_er 2
seconds, the LED ['or that MODE will begin
to flash.
Press and release the SELECT button on the remote control within 2 seconds to move
to the next MODE. the new MODE's LED
will lit lk)r 2 seconds, then begin to flash.
Repeat the steps above to continue through
the MODEs until the desired MODE is
selected.
MODE TIMEOUT SETTINGS:
When the remote MODE times out, the ]'emote con-
trol will revert to the TV MODE. Timeout length
occurs fiom tile last command or button press in any
o1"/lie MODEs. The length o1"time beff_e a MODE
timeout occurs can be changed.
To change the length ol' the timeout duration, [_l-
low the steps below:
4
Simultaneously, press the SELECT button
and the NUMBERED button fiom the list
below to reset the desired amount of timeot_t
length.
Digit 1 = 15 seconds before timeout
Digit 2 = 30 seconds before timeout
Digit 3 = 60 seconds before timeout
Digit 4 = 120 second before timeout
(IZxample: You want the MODE tlmeout
to be 60 second*, you would need to
press the SELECT button and the
NUMBER 3 button at the same time.)
It is recommended that you use Philips
brand external accessory devices with your
Philips television m insm'e pro_r remote
control ['unctions.If you are using Philips
brand accessory devices, your ]'emote con-
tml should be ready to use with these
devices.
3O
4
A
I
4 ¸
DVD SAT AMP ACC
F
VSl_ DVB SAT AMP ACC
®®®®
®