Standby Mode Energy Savings; Watching Live Tv Channels; Changing Channels - Philips 39PFL4756/F8 User Manual

Standby mode energy savings

When you turn off your TV, it remains in a higher power mode for a few minutes, after
which it goes into a very low power standby mode. If you turn on the TV again before
it has entered the very low power mode, it turns on immediately. After the TV goes
into the lower power standby mode, it takes a few seconds longer to start up.
Only in connected mode
enabled, your TV starts up almost immediately regardless of how long it has been
turned off, but uses somewhat more power in standby mode. For more information,
see Fast TV start.

Watching live TV channels

Select the Live TV tile in the Home screen. Your TV remembers the last channel you
watched and starts with that channel playing.

Changing channels

To change channels, you can do any of the following:
•
Press UP to change to the next higher channel.
•
Press DOWN to change to the next lower channel.
•
Press LEFT to display the channel list, and then press the arrow keys to select
the channel or program you want to watch. Press REWIND
FAST FWD
highlighted the channel or program you want to watch, press OK. (If you
decide you don't want to change channels, press BACK
•
Only if Live TV Pause is not enabled
channel. Press again to return to the channel you were watching before you
pressed REPLAY
• If REPLAY
Note:
the Roku mobile app. For more information, see
, you can optionally enable Fast TV start . When this option is
to move through the list one page at a time. When you've
.
is not available on your remote, you can use this feature in
, press REPLAY
Roku mobile
44
and
.)
to jump to the previous
app.