Table of Contents
Advertisement
Chapter 15
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
>
Management
section as needed.
•
Forbid all devices to manage the router remotely:
Do not tick the
Enable
•
Allow all devices to manage the router remotely:
1. Tick the
Enable
checkbox of
2. Keep the HTTPS and HTTP port as default settings (recommended) or enter a value
between 1024 and 65535.
3. Select
All Devices
4. Click SAVE.
Devices on the internet can log in to
as http://113.116.60.229:1024) to manage the router.
Tips:
•
You can find the WAN IP address of the router on
•
The router's WAN IP is usually a dynamic IP. Please refer to
in to the router through a domain name.
•
Allow a specific device to manage the router remotely:
System
>
Administration
checkbox of
Remote
Remote
Management.
for
Remote
Managers.
http://Router's WAN IP address:port number
Network Map
and complete the settings in
Management.
> Internet.
Set Up a Dynamic DNS Service Account
Manage the Router
Remote
(such
if you want to log
90
Advertisement
Table of Contents
