Page 2
Only tighten the screws by hand with provided allen key. Before use please check if fixings are tightened fully. Please insert cams (B) as follows. EDGE EDGE Once panel 5 is inserted, lock the cams. When sliding Now fit the base carefully into place ensuring the back in the back, ensure it fits flush into the recess of the slides into the recess in the base.
Page 3
Only tighten the screws by hand with provided allen key. Before use please check if fixings are tightened fully. Lock Direction How to adjust the doors. base Hinge fitting Hinge adjustment holes 1.Loosen screw (B) to move the base to line up the guiding hole.
Need help?
Do you have a question about the B1-1CP80 and is the answer not in the manual?
Questions and answers