Table of Contents
Advertisement
Power Feeder & Column Controls
I
H
Figure 2. Location of column controls.
H. Angle Adjustment Scale: Indicates angle
that power feeder assembly is rotated relative
to overarm shaft. Loosen hex bolts on upper
elbow-joint to allow rotation; tighten hex bolts
to secure power feeder angle.
I.
Horizontal Travel Lock: Locks horizontal
position of power feeder.
J.
Vertical Travel Crank Handle: Adjusts ver-
tical position of overarm shaft and power
feeder (when vertical travel lock is loosened).
K. Vertical Travel Lock: Locks power feeder
height setting.
Model T33295 (Mfd. Since 03/23)
J
K
L
M
Figure 3. Location of power feeder and column
controls.
L.
Horizontal Travel Handwheel: Moves over-
arm shaft horizontally and adjusts lateral
position of power feeder (when horizontal
travel lock (I) is loosened).
M. Rotation Lock: Allows vertical column to
rotate when loosened. Prevents vertical col-
umn from rotating when tightened.
N. Upper Elbow-Joint Lock: Allows lower
elbow and power feeder to rotate around
upper elbow. Tighten to secure lower elbow.
O. Lower Elbow-Joint Lock: Allows power
feeder to rotate on its axis when swivel lock
pin is disengaged. Tighten to secure power
feeder swivel position.
P. Swivel Lock Pin: Allows power feeder to
rotate when disengaged. Locks power feeder
in horizontal position when engaged in either
of two detents.
N
O
P
-5-
Advertisement
Table of Contents
