Table of Contents
Advertisement
Chains & Sprockets
Lube Type ............. T26419 or NLGI#2 Equivalent
Amount .................................................Thin Coat
Lubrication Frequency ...........8 Hrs. of Operation
Use mineral spirits to clean any debris and built-
up grime. To prevent rust and binding, brush the
sprockets and chains (see Figure 38) with a light
film of NLGI#2 grease. It will be necessary to
remove the chain cover to access the chain and
sprockets.
Sprockets
(4 of 8)
Chains (3 of 7)
Figure 38. Location of chain and sprockets
(chain cover removed).
Vertical Travel Leadscrew
Lube Type ............. T26419 or NLGI#2 Equivalent
Amount .................................................Thin Coat
Lubrication Frequency ...........8 Hrs. of Operation
Use mineral spirits to clean any debris and built-
up grime. Brush a thin coat of lubricant on the
threads of the leadscrew (see Figure 39), then
rotate leadscrew through its full path to distribute
the grease.
Vertical
Travel
Leadscrew
Figure 39. Vertical travel leadscrew.
Model T33295 (Mfd. Since 03/23)
Lock Levers
Lube Type ........................... ISO 32 or Equivalent
Amount .................................................Thin Coat
Lubrication Frequency ...........8 Hrs. of Operation
To prevent rust and binding, periodically clean
and oil all lock-lever and leadscrew threads
(see Figure 40) with light machine oil.
Figure 40. Location of levers to lubricate.
Overarm Rack
Lube Type ............. T26419 or NLGI#2 Equivalent
Amount .................................................Thin Coat
Lubrication Frequency ...........8 Hrs. of Operation
Clean the overarm rack teeth (see Figure 41) with
mineral spirits, shop rags, and a brush. When dry,
use a brush to apply a thin coat of grease to the
teeth, then move the overarm back and forth sev-
eral times to distribute the grease.
Figure 41. Overarm rack teeth.
Overarm
Rack
-29-
Advertisement
Table of Contents
