Getting Started - Philips sonicare 3000 Series Manual

Intensities
×3
×2
×1

Getting Started

Charging your Cordless Power Flosser
Deep clean (3000 Series)
This mode utilizes Pulse Wave technology, to
guide you tooth by tooth, using strong and
gentle pulses of water for a thorough clean.
With Pulse Wave technology the flow of the
water increases and decreases in intensity,
providing a brief pause during which you can
move the nozzle to the next space between your
teeth.
Your Cordless Power Flosser comes with three
different intensity settings. To change the
intensity to the setting you prefer, press the
intensity button.
Note: It is recommended to start using this Power
Flosser on the lowest intensity and increase the
intensity over the course of a few weeks.
1 Gently pull and rotate the charging port cover
on the back of the Cordless Power Flosser to
expose the charging port .
2 Plug the USB-A cable into the charging port on
the back of the Cordless Power Flosser.
Note: Make sure the handle is completely dry
before you connect the USB-A cable.
13
English