Philips sonicare 3000 Series Manual page 12

12
English
Modes and intensities
Modes (Specific models only)
15
sec.
15
sec.
15
sec.
15
sec.
Note: The contents of the box may not include all
items shown depending on the product
configuration purchased.
Depending on your model, your Cordless Power
Flosser is equipped with either one or two
different modes. If you have a device with two
modes, press the mode button to toggle
between standard clean mode and deep clean
mode to select your desired mode. If you have a
device with one mode, it is already in the clean
mode.
Clean (2000 and 3000 Series)
This mode, with pacer, provides constant water
pressure for a great clean.
The pacer indicates when you are supposed to
move to the next section of your mouth via a
short pause in the waterflow every 15 seconds.
This Cordless Power Flosser comes with the pacer
activated.
To activate or deactivate the pacer
With the Cordless Power Flosser off, press and
hold the intensity selection button for 3 seconds.
- When deactivated, the battery indicator light
will flash amber once
- When activated, the battery indicator light will
flash green twice