Hasbro LAZER TAG 13744 Manual page 8

uSinG thE Shot BlASt™* wEApon ACCESSory
note: tags fired by the
Shot BlASt accessory
have a shorter range than
regular tags, but affect a
wider area. if you catch
several opponents standing
close to one another, you
can actually hit all of them
at once!
uSinG thE pinpoint SiGht
1. Slide the SHOT BLAST accessory onto the
2. To arm the SHOT BLAST, slide the Rack
3. When you pull the trigger, your Tagger will fire
4. You will need to Rack the SHOT BLAST again
5. If you pull the Trigger without using the Rack,
6. To remove the SHOT BLAST, slide the
1. Slide the PINPOINT SIGHT onto the accessory rail
on the top of your Tagger until it locks into place.
2. Look into the PINPOINT SIGHT. If it is properly
attached, you will see a green dot reflected on the
crosshairs.
3. Line up the green dot in the center of the
crosshairs with your target for pinpoint accuracy!
1 7
Get other manuals https://www.bkmanuals.com
front of the Tagger until it snaps into place.
toward you, and then forward again.
an extra-powerful blast. Depending on how
accurate your shot is, you could take as many
as three points off your target's Strength
Gauge.
before you can fire it.
you will fire a single, regular Tagger shot.
Release Button down and pull it off
the Tagger.