Hasbro LAZER TAG 13744 Manual page 10

SEtup
Insert the cable plugs into the AV inputs on your TV, VCR or DVD player.
Connecting to a tV:
1. Insert the cable's white plug into the white audio-in jack
on the TV.
2. Insert the cable's yellow plug into the yellow video-in jack
on the TV.
note: these jacks are normally found on the front of
the tV near the adjustment controls, or on the back
of the tV near the antenna and cable connections
3. Turn on your TV, and set it to the channel/video input mode
directed by your TV owner's manual.
Connecting to a VCr or dVd player:
1. Make sure the VCR or DVD player is properly connected
to the TV.
2. Insert the cable's white plug into the white audio-in
jack on the VCR or DVD player.
3. Insert the cable's yellow plug into the yellow video-in
jack on the VCR or DVD player.
4. Turn on your TV and VCR or DVD player.
5. Set your TV, VCR or DVD player to the channel/video input
mode directed by your TV, VCR or DVD player owner's manual.
1 9
Get other manuals https://www.bkmanuals.com