Flexible Ducting - Schweigen BR550 Installation Manual

Flexible Ducting

Flexible ducting must be fully extended and cut to the required length upon installation. Maximum fan
performance will not be achieved unless the ducting is fully extended. Failure to fully extend the ducting results
in smaller air passage and lower airflow. Incorrect installation may reduce airflow and increase noise levels. Call
outs relating to incorrect installation will result in a service fee directed to the customer. Schweigen will take
no responsibility for problems caused by faulty installation. Installation must be carried out by an experienced
installer. An experienced installer list can be obtained from Schweigen website www.schweigen.com.au.
NOTE: In shallow roof spaces
extend flexi ducting horizontally
IMPORTANT
Please do not crush or kink flexible
ducting as it will reduce air flow and
may cause noise to occur through
the system. Ducting must be kept
taut at all times.
Please keep the flexi ducting taut,
and 3-4 metres in length
Figure 5 Flexible Ducting
5. Flexible Ducting
Page 13