Stainless Steel - Kenmore ELITE 363.6367 Series Use & Care Manual

STAINLESS STEEL
Do not use a steel-wool pad; it will scratch
the surface,
To clean stainless steel surfaces, use a hot,
damp cloth with a mild detergent suitable for
stainless steel surfaces Use a clean, hot,
damp cloth to remove soap Dry with a dry,
dean cloth
tf food soil remains, try a general kitchen
cleane[
For hard-to-clean soil, use a standard
stainless-steel cleaner, such as Ben-AmP
or Cameo ®
Apply cleaner with a damp sponge. Use a
clean, hot, damp cloth to remove cleaner.
Dry with a dry, clean cloth Always scrub lightly
in the direction of the grain.
After cleaning, use a stainless-steel polish,
such as Stainless Steel Magic_ e Revere
Copper and Stainless Steel Cleaner e or Wenol
Aif Purpose Metal Polishe Follow the product
instructions for cleaning the stainless-steel
surface,
COOKTOP LIGHT/NITE LIGHT
Replace the burned-out bulb with a 120 volt,
20 watt (max°), halogen bulb (WB36X10213),
available from your nearest Sears Parts &
Repair Center. Call 1-800-€-MY-HOME. e
1 To replace the cooktop lightinite light, first
disconnect the power at the main fuse or
circuit breaker panel, or puti the plug
2 Remove the screw from the side of the light
compartment cover and lower the cover
until it stops,
3 Be sure the bulb is cool before removing,
Remove the bulb by pulling it straight out
4 Push the new bulb straight into the
receptacle all the way
5 Raise the Lightcover and replace the screw.
Connect electrical power to the oven
28