Viking TR-1 Technical Practice page 4

Programmable tone/pulse toll restrictor

page of 4

/ 4
Bookmarks

For your records and ease in programming, write down the numbers and check off the features in the spaces below before pro-

gramming. Note: If you want to restrict/allow a number that begins with the digit 1, you must program the digit "1" first. Example:

17153868861.

Q. User Programmable Allow/Restrict Table

Number (1-12 digits)

________________________

R. User Programmable Ignore Table

Number (1-12 digits)

________________________

Type of Service

The TR-1 is designed to be used on standard device telephone lines. The TR-1 is connected to the telephone line by

means of a screw terminal. Connection to telephone company-provided coin service (central office implemented sys-

tems) is prohibited. Connection to party line service is subject to State tariffs.

Telephone Company Procedures

The goal of the telephone company is to provide you with the best service it can. In order to do this it may occasionally

be necessary for them to make changes in their equipment, operations, or procedures. If these changes affect your serv-

ice of the operation equipment, the telephone company will give you notice in writing, allowing you to make any changes

necessary to maintain uninterrupted service. If you have any questions about your telephone line, such as, how many

pieces of equipment you can connect to it, the telephone company will provide you information upon request. In certain

circumstances, it may be necessary for the telephone company to request information from you, concerning the equip-

ment which is connected to your telephone line. Upon request request of the telephone company, provide the FCC reg-

istration number and the ringer equivalence number (REN) of the equipment which is connected to your line; both of

these items are listed on the equipment label. The sum of all the REN's on your telephone lines should be less than five

in order to assure proper service from your telephone company. In some cases, a sum of five may not be usable on a

given line.

Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or

subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate

such changes.

Fax Back Doc 705

Location

Number (1-12 digits)

#00

________________________

#01

________________________

#02

________________________

#03

________________________

#04

________________________

#05

________________________

#06

________________________

#07

________________________

#08

________________________

#09

________________________

#10

________________________

#11

________________________

#12

________________________

#13

________________________

#14

________________________

#15

________________________

#16

________________________

#17

________________________

#18

________________________

#19

________________________

Location

Number (1-12 digits)

#60

________________________

#61

________________________

#62

________________________

#63

________________________

#64

________________________

#65

________________________

Location

#20

#21

#22

#23

#24

#25

#26

#27

#28

#29

#30

#31

#32

#33

#34

#35

#36

#37

#38

#39

Location

#66

#67

#68

#69

#70

#71

If Problems Arise

If any of your telephone equipment is not operating properly, you should immediately remove it from your telephone line

as it may cause harm to the telephone network. If the telephone company notes a problem, they may temporarily dis-

continue service. When practical, they will notify you in advance of this disconnection. If notified, you will be given the

opportunity to correct the problem and informed of your right to file a complaint with the FCC.

In the event repairs are ever needed on your Viking product, they should be performed by Viking Electronics, Inc. and

or an authorized representative of Viking Electronic, Inc.. For more information contact Viking Product Support at

(715)386-8666.

FCC Part 15 Limitations

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequen-

cy energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which

case the user will have to correct the interference at his own expense.

Printed in the U.S.A.

Check the Features in Use

____ ✱2 Set user programmable table to allow

____ ✱3 Set user programmable table to restrict

____ ✱4 Set all other numbers to allow

____ ✱5 Set all other numbers to restrict

____ ✱6 Enable call timer on outbound calls only

____ ✱7 Enable call timer from off-hook

____ ✱8 Turn TR-1 off

____ ✱9 Turn TR-1 on

____ ✱07 Allow 1-800 numbers

____ ✱08 Restrict 1-800 numbers

Number

______________(6-digits) #47 Security Code

_____ (2-digits) #48 Maximum time limit

_____ (2-digits) #49 Maximum digit length

______________(6-digits) #50 Bypass Code

S. Switch 6 Programming

(Ignore PABX Line Access Numbers)

____ Disabled (Switch ON)

____ Enabled (Switch OFF)

Position:

Number (1-8 digits) Location

___________________

##61

##62

##63

##64

##65

##66

##67

##68

Viking TR-1 Technical Practice page 4

Related Manuals for Viking TR-1