Parts And Controls - Pioneer LaserVision LaserDisc PR-8210 Operating Instructions Manual

PARTS AND CONTROLS
(D DISC CLAMP
This holds the disc onto the turntable when the
hood is closed to assure that the disc rotates
smoothly.
(2 TURNTABLE
Place a disc on this platter so it fits over the raised
center hub. The turntable is directly connected to
the motor so the precise speed is maintained at
all times.
@ OBJECTIVE LENS
This lens focuses the laser beam onto the disc and
picks up the beam reflected back from the disc.
Note that the lens surface must be kept clean in
order to maintain optimum performance.
@ POWER
Press this switch to turn power on and off.
(9 POWER INDICATOR
This lights up to show the power is on.
(8 REJECT/OPEN
Press this key to cut off operation and to open the `
hood.
@ HOOD UNLOCKED INDICATOR
This indicator lights up when the hood is open and
goes out when the hood is completely closed and
locked. Note that the player can not be operated
until this indicator goes out.
a
d$ d$
STAND BY INDICATOR
This indicator flashes on and off during those peri-
ods when some time is required for the player to
switch to the next commanded function mode.
For example: When the PLAY key (or > marked
end of the PLAY/PAUSE
key) is pressed after
REJECT, during search mode, during the return
period.
@ DISC INDICATORS
A few moments after the PLAY key (or »
marked end of the PLAY/PAUSE key) has been
pressed, one of these indicators shows whether a
CAV or CL V disc is being played.
PLAYBACK MODE INDICATORS
One of these indicators shows the playback mode
presently selected.
($ CX INDICATOR
This indicator lights when the CX noise reduction
system is activated.
(2 AUDIO INDICATORS
These indicators show whether only one or both
audio channels are being heard.
(3 SLOW SPEED CONTROL
Use this control to adjust the speed of slow motion
playback.