Remove and Install
(For: JCB Tier 2/3 Mech Engine 4 Cyl)
Before Removal
1. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
2
4
2
4
3
5
2
4
2
4
2
4
2
4
2
4
1 Rocker shaft assembly
3 Rocker shaft - oil feed pedestal fixing bolt (x1)
15 - 160
Figure 202.
1
9823/0000-1
42 - Rocker and Fittings
2. Get access to the engine.
3. Disconnect and remove the fuel pipes from the
fuel injectors, refer to Fuel pipes (PIL 18-96).
4. Remove the rocker cover, refer to (PIL 15-42).
7
2 Rocker shaft fixing bolts (x7)
4 Pedestals (x7)
15 - Engine
00 - General
6
743830
15 - 160