Panasonic NC-KD300 Operating Instructions Manual page 14

Power base
Wipe with a well - wrung cloth.
To store
• Dry it thoroughly.
•Put in a plastic bag and seal the bag to prevent insects etc. from entering.
Troubleshooting
Please check the following points before arranging for service.
Problem
Power switch does not
turn on.
Water does not boil.
电水壶KD-300海外向说明书_A5_M1_20220704.indd13 电水壶KD-300海外向说明书_A5_M1_20220704.indd13
Cause
● Is the power plug
disconnected?
● Is the body set correctly
on the power base?
● Is there a piece of metal
or foreign material
adhered to the power
base connector or body
connector?
● The temperature sensor
inside the appliance is
not reset.
Did you try to turn
●
on the power switch
without water in the
appliance?
)
The boil-dry protection
will work to turn off the
power switch.
Is the power switch
●
turned off?
and Action
● Insert the power plug into
outlet firmly. (P . EN10)
● Ensure the body is set
correctly.
● Remove the piece of
metal or foreign material.
(P. EN12 – EN13)
● Let it stand for 3 minutes
after adding tap water
to reset the temperature
sensor.
● Fill with water and turn
on the power switch. (P.
)
EN10)
● Turn on the power
switch (Press " ")
（P. EN11）
Power base
connector
EN13
2022/7/418:07:44 2022/7/418:07:44