Table of Contents
Advertisement
Quick Links
TECHNICAL
TECHNICAL
T
T
E
L
E
E
L
E
will not be able to hear the called party. This makes it a very effective security meas-
ure, as there is no other indication that the site is being monitored.
F
e
a
t
u
r
e
s
F
e
a
t
u
r
e
s
• LED to indicate call connected
• One-way talk path for listening without
audible indication
• Unobtrusive - mount anywhere at any angle
with supplied foam tape
• Provides security and peace of mind
S
S
C
O
M
O
L
U
T
I
O
N
S
C
O
M
O
L
U
T
I
O
N
S
Emergency Phone Panic Button Kit
2
1
C
2
1
C
F
O
R
T
H
E
S
T
F
O
R
T
H
E
S
T
The PB-1 Panic Button Kit connects to a
Viking 1600A Series Emergency Phone to
provide a one-way talk path to the pre-pro-
grammed number when used.
The PB-1 will activate the 1600A Series
Emergency Phone and allows the called
party to light a red LED to indicate that the
call is connected. The called party will be
able to hear the installation site, but the site
A
p
p
l
i
A
p
p
l
• Courtrooms
• Bank tellers
• Gas stations
• Motel reception desks
• All night restaurants
• Convenience stores
S
p
e
c
S
p
e
c
Dimensions: 65mm x 35mm x 20mm (2.56" x 1.38" x 0.79")
Shipping Weight: 0.05kg (0.1 lbs)
Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% non-
condensing humidity
Cord Length: 7 ft
Connections: (1) RJ11 jack, (1) 10-position IDC connector, (4)
gel-filled butt connectors
Panic Button
E
N
T
U
R
Y
E
N
T
U
R
Y
c
a
t
i
o
n
s
i
c
a
t
i
o
n
s
i
f
i
c
a
t
i
o
n
s
i
f
i
c
a
t
i
o
n
s
PB-1
PB-1
Kit
June 10, 2008
Advertisement
Table of Contents
Related Manuals for Viking PB-1
Summary of Contents for Viking PB-1
- Page 1 • Unobtrusive - mount anywhere at any angle with supplied foam tape • Provides security and peace of mind The PB-1 Panic Button Kit connects to a Viking 1600A Series Emergency Phone to provide a one-way talk path to the pre-pro- grammed number when used.
- Page 2 1, 2 and 3, be aware that you will have to pay a restocking charge. Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of one year from the date of purchase from any authorized Viking distributor or 18 months from the date manufactured, which ever is greater.
- Page 3 On the white connector, cut the black and red wires (closest to the screw terminals) leading to the LED from the 1600A (3V) board. Step 5. Attach the black wire from the board to the black wire from the PB-1 using a gel-filled butt connector (do not strip prior to inserting). Step 6.
- Page 4 Enhanced Weather Protection (EWP). For more information, request DOD# 215. Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no respon- sibility for errors and omissions contained in this information.
Need help?
Do you have a question about the PB-1 and is the answer not in the manual?
Questions and answers