Troubleshooting - Klarstein DRYFY PRO CONNECT Manual

Turn the WiFi of the DryFy Pro Connect on and off
1. Turn on WiFi connection:
Press the WIFI button for 3 seconds to activate the wifi module inside the device.
The WiFi indicator light will flash and the device will automatically search for other
WiFi devices in the area.
Note: Device will back to "--" automatically 5 minutes after finished the works, or no
command input in 5 minutes after switched on the device.
2. Switch off WiFi connection:
To turn off WiFi and restore default factory settings, simultaneously press the
TIME (+) and TIME (-) buttons until the unit beeps. Once the WiFi indicator light
disappears, the connection is terminated.
For changes to the WLAN or connection problems
If you make changes to your WLAN (e.g., a password change), the device must also
be reconnected. Press the WIFI button for 3 seconds to activate the wifi module inside
the device. The WiFi indicator light will flash and the device will automatically search for
other WiFi devices in the area.
1 Open the Klarstein app.
2 Open the device control of the DryFy Pro Connect.
3 Follow the instructions from the app.

TROUBLESHOOTING

Error codes
Code Description
E1 Room temperature (ambient temperature) sensor for short circuit
E2 Room temperature sensor open circuit
E3 Humidity sensor short circuit
E4 Humidity sensor open circuit
E5 Coil sensor short circuit
E6 Coil sensor open circuit
EN
29