Bosch GFA 18-H Professional Original Instructions Manual page 8

8 | English
Take care when carrying out demolition work using
u
the chisel. Falling fragments of the demolition material
could injure you or any bystanders.
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Additional safety instructions and working
advice
Before any work on the power tool (e.g. maintenance,
u
tool change, etc.) as well as during transport and stor-
age, set the rotational direction switch to the middle
position. There is risk of injury from unintentionally
pressing the on/off switch.
If the application tool should become blocked, switch
u
the power tool off. Loosen the application tool.
Switching on when the drilling tool is blocked may
u
cause high torque reactions.
Avoid switching on the tool accidentally. Make sure
u
that the on/off switch is set to the off position before
inserting a battery. Accidents can occur as a result of
carrying the power tool with your finger on the on/off
switch or inserting the battery while the power tool is
switched on.
Read and strictly observe the safety instructions in
u
the operating instructions of the cordless drill/driver.
Always make sure that you maintain a safe distance.
u
When operating the power tool in high up areas, e.g.
on a ladder, ensure that no one is beneath you.
Technical Data
Hammer adapter with auxiliary handle
Article number
Cordless screwdriver
Article number
Rated speed
Impact rate at rated speed
1 609 92A 7VX | (10.08.2022)
Never touch the application tool or parts of the power
u
tool near to the application tool after use; these may
be extremely hot. There is a risk of burns.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool (GSR 18V-60 FC/GSR 18V-90 FC with ham-
mer attachment GFA 18-H) is intended for hammer drilling
in concrete, brick and stone.
The hammer attachment GFA 18-H may only be used with
the GSR 18V-60 FC/GSR 18V-90 FC cordless drill/drivers.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Holder
(2) Torque presetting ring
(3) Gear selector switch
(4) Battery
(5) Battery release button
(6) Worklight
(7) Rotational direction switch
(8) On/off switch
(9) Locking ring
(10) Hammer adapter
(11) Auxiliary handle
(12) Handle (insulated gripping surface)
Items included
Hammer adapter (10) with auxiliary handle (11).
Application tools and other accessories shown or described
are not included with the product as standard.
You can find the complete selection of accessories in our ac-
cessories range.
GFA 18-H
2 609 199 816
GSR 18V-60 FC
3 601 JG7 1..
-1
min 0–1900
-1
min 0–5400
GFA 18-H
2 609 199 816
GSR 18V-90 FC
3 601 JK6 2..
0–2100
0–5900
Bosch Power Tools