GE GNSV70FBL Owner's Manual And Installation Instructions page 11

Installation Instructions.
Mounting SystemInstallation
Mounting System to Screws Installed in Wall
I.
]_.elnove shrink wrap fl'om filter systeln.
2. Hang the system on the previously installed screws using the openings on the back of the tlnit (Fig. 9).
3.
If the head ot the screw will not slide into the upper slot, back out the screw bv 1/4 mrn and txy again.
4. If the system is too loose when placed on the wall, tighten the screws by 1/4 turn and txy again until a desired fit is achieved.
Fig. 9
//