Safety National Conventions The following subsections describe national conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows: NOTE: A NOTE indicates important information that helps you make better use of your computer system.
Power The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature.
Installation Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product.
Cleaning Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet. When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface.
Other If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center. Make sure that the ventilating openings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vibration or high impact conditions during operation. Do not knock or drop the monitor during operation or transportation.
Setup Contents in Box Quick Start Warranty card Stand Base Power Cable HDMI Cable DP Cable Not all signal cables will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.
Adjusting Viewing Angle To achieve the best viewing experience, it is recommended that the user can make sure they are able to look at their whole face on the screen, then adjust the monitor’s angle based on personal preference.. Hold the stand so you will not topple the monitor when you change the monitor’s angle. You are able to adjust the monitor as below: 130mm 90°...
Connecting the Monitor Cable Connections In Back of Monitor and Computer: 1. HDMI1 2. HDMI2 3. DP1 4. DP2 5. Earphone 6. Power Connect to PC 1. Connect the power cord to the back of the display firmly. 2. Turn off your computer and unplug its power cable.
5. Reconnect the cables. Refer to the user’s manual that came with the optional wall mounting arm for instructions on attaching it to the wall. Noted: VESA mounting screw holes are not available for all models, please check with the dealer or official department of AOC. * Display design may differ from those illustrated. WARNING: 1.
G-SYNC Compatible function 1. G-SYNC Compatible function is working with DP/HDMI 2. To enjoy the perfect gaming experience with G-SYNC, you need to purchase a Separate NVIDIA GPU card that supports G-SYNC. G-sync system requirements Desktop computer connected to G-SYNC monitor: Graphics cards supported: G-SYNC features require NVIDIA GeForce®...
It is compatible with input signals in HDR10 format. The display may automatically activate the HDR function if the player and content are compatible. Please contact the device manufacturer and the content provider for information on the compatibility of your device and content. Please select “OFF”...
Adjusting Hotkeys Source/Exit Game Mode/< Dial Point/> Menu/Enter Power Power Press the Power button to turn on the monitor. Menu/Enter When there is no OSD, Press to display the OSD or confirm the selection. Game Mode/< When there is no OSD, press ”<” key to open game mode function, then press ”<” or “>” key to select game mode (FPS, RTS, Racing, Gamer 1, Gamer 2 or Gamer 3) basing on the different game types.
OSD Setting Basic and simple instruction on the control keys. PIP Setting Color Setup Picture Boost OSD Setup Game Setting Extra Exit Luminance Contrast Gamma Gamma 1 Brightness HDR Mode Eco Mode Standard Menu-button to activate the OSD window. 1). Press the Left or Right to navigate through the functions.
Luminance PIP Setting Color Setup Picture Boost OSD Setup Game Setting Extra Exit Luminance Contrast Gamma Gamma 1 Brightness Eco Mode Standard HDR Mode Contrast 0-100 Contrast from Digital-register. Brightness 0-100 Backlight Adjustment Standard Standard Mode Text Text Mode Internet Internet Mode Game Game Mode...
Page 18
When “HDR” is set to a non off state, the “Contrast”, “Brightness”, “Brightness Profile”, “Gamma”, and “DCR” items cannot be adjusted.
Color Setup Color Setup PIP Setting Picture Boost OSD Setup Game Setting Extra Exit Luminance Color Temp. Warm DCB Mode Green DCB Demo Blue Warm Recall Warm Color Temperature from EEPROM. Normal Recall Normal Color Temperature from EEPROM. Cool Recall Cool Color Temperature from EEPROM. Color Temp.
Picture Boost PIP Setting Picture Boost OSD Setup Extra Exit Luminance Game Setting Color Setup Bright Frame Brightness H. Position Frame Size Contrast V. Position Bright Frame on or off Disable or Enable Bright Frame Frame Size 14-100 Adjust Frame Size Brightness 0-100 Adjust Frame Brightness...
OSD Setup PIP Setting Extra Exit Luminance OSD Setup Game Setting Color Setup Picture Boost Language English H. Position Transparence V. Position Timeout Break Reminder Volume DP Capability 1.2/1.4 Language Select the OSD language Timeout 5-120 Adjust the OSD Timeout Please be noted that only DP1.2 support G-SYNC DP Capability 1.1/1.2/1.4...
PIP Setting Game Setting PIP Setting Extra Exit Luminance Color Setup Picture Boost OSD Setup PIP Setting Size Small Swap Main Source Position Right-up Sub Source Audio PIP Setting OFF / PIP / PBP Disable or Enable PIP or PBP. Main Source HDMI1/HDMI2/DP1/DP2 Select main screen source.
Game Setting Extra Exit Luminance Picture Boost OSD Setup Game Setting Color Setup PIP Setting Game Mode Game Color G-SYNC Shadow Control LowBlue Mode Frame Counter Low Input Lag Overdrive For playing FPS (First Person Shooters) games. Improves black level in dark theme. For playing RTS (Real Time Strategy).
Extra Exit Picture Boost OSD Setup PIP Setting Game Setting Extra Luminance Color Setup Input Select Auto Resolution : 3840(H)X2160(V) SDR Reset H. Frequency : 133KHz HDMI1 120Hz Off Timer 120Hz V. Frequency : 60Hz HDMI2 DDC/CI Auto/HDMI1/HDMI2/DP1/ Input Select Select Input Signal Source Off Timer 0-24hrs...
Press to auto-adjust. Please refer to Regulation & Service Information which is in the CD manual Regulation & Service or www.aoc.com (to find the model you purchase in your country and to find Regulation & Service Information in Support page.
Specification General Specification Model name U27G3X Driving system TFT Color LCD Panel Viewable Image Size 68.4 cm diagonal Pixel pitch 0.15525mm(H) x 0.15525mm(V) Display Color 1.07B Colors Horizontal scan range 30k-255kHz Horizontal scan Size(Maximum) 596.16 mm 48-144Hz(HDMI) Vertical scan range 48-160Hz(DP) Vertical Scan Size(Maximum) 335.34 mm...
Pin Assignments 19-Pin Color Display Signal Cable Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name TMDS Data 2+ TMDS Data 0- DDC/CEC Ground TMDS Data 2 Shield TMDS Clock + +5V Power TMDS Data 2- TMDS Clock Shield Hot Plug Detect TMDS Data 1+ TMDS Clock-...
Plug and Play Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities.