Panasonic Omnivision PV-DF2004 Operating Instructions Manual page 68

Check the following points once again if you are having trouble with your unit.
Auto power_bout 5 mira in DVD mode J
wth_ signat in TV or 45-46 J
Playback mod_ Turn the power back oH I
Makesureyourantennasystem(TVorCABLE)iscorrectlyset. 14
Completely insert Power P}ug into an AC outlet. 13
Set POWER button to ON. 11-12
Adjust BRIGHTNESS, SHARPNESS, and PICTURE controls in 28-29
the SET UP Video Adiustment.
Adjust VOLUME control. 22
Adjust SHARPNESS and PICTURE controls in the SET UP
Video Adjustment. 28-29
Adjust TINT and COLOR controls in the SET UP Video
Adjustment. 28-29
Install a directional antenna 14
Make sure the selected channel is in unit's memory. 19
Onty the channel being recorded can be viewed on this unit. 31
Make sure your antenna system (TV or CABLE), is correctly
set. 14
Make sure cassette record tab is intact. 8
Check that clock is set to current time and date. 45
Make sure DSS/CABLE box (if used) is left on and tuned to 14
channel to be recorded
Set recording Start/Stop times correctly 34-35
Timer recording may not be performed or continued if a power
interruption of more than 1 minute occurs before or during a
__ Timer Recording, even after power is restored.
Adjust TRACKING control in either direction 37
Try Head Clean}rig 8
Make sure VCR LOCK is set to off 37
Aim Remote directly at the remote sensor on the unit. Avoid any 12
obiect blocking signal path
Inspect the remote batteries. 8
Make sure VCR LOCK is set to off 37
Exposing unit remote sensor to direct fluorescent or outdoor
light may cause signal interference. 12
Press TViVCR for TV_VCR mode. 12
Press DVD for DVD mode. 12
Check remote batteries 8
68