Handling
precautions
• Sticking a labet on the
disc may impair DVD-R
playback
• Do not attach sticker to
disc. (Do not use discs
with exposed adhesive
from tape or left over
peeled-off stickers)
• Only hold disc by edges
as shown below.
Fingerprints,
dirt and
scratches
can cause
skipping and distortion
• Do not write on label
side of disc.
• Never use record
cleaning sprays,
benzine, thinner, static
electricity
prevention
liquids, or any other
solvent.
• Do not try to close disc
Disc tray
tray when disc is not
properly placed
/
l)isc
This unit is designed and manufactured
to
respond to the Region Management
Information that is recorded on a DVD disc. ff
the Region number described on the DVD
disc does not correspond
to the Region
number of this unit, this unit cannot play this
disc.
For U.S.A.
and Canada
• The region number of this ptayer is "1"
• The player will play DVD-Video
marked with
labets bearing "1" or "ALL"
Example:
With a soft, damp (water only) cloth, gently
wipe from the center hole to the outer edge
as shown below. (Wiping in a circular pattern
will scratch the surface.)
• DVD-RAM, DVD-R :
Clean only with the DVD-RAM disc cleaner
available. Never use cloths or cleaners for CDs,
etc
tf disc is brought
from a cold to a warm
environment,
moisture may form on the
disc
Wipe away moisture with a soft, dry, lint_free
cloth before using disc. (See above.)
Improper
disc storage
Discs can be damaged if stored or left in
these environment:
• Exposed todirectsunlight.
• Areas that are humid or dusty.
• Near heat (i.e. heater, radiator, etc.).
10