Audio Settings - AMC DSP4X6 User Manual

Software interface

Audio Settings

NOISE GATE (6)
Set the threshold level, attack and
release time for channel input noise gate.
INPUT GAIN (7)
Set the signal input gain using the slider,
or by entering specific value in dB.
Here the channel can be muted or
phase-inverted.
INPUT EQUALIZER (PEQ) (8)
Input channels have separate 10-band equalizers. Each band can be set to act
as parametric (PEQ), low or high shelf (LSLV / HSLV).
Click and hold left button on the highlited circle with an EQ band number
and drag it to set the frequency and gain. Each parameter can also be set by
entering specific values in the chart. Each band can be individually bypassed.
BYPASS button mutes and unmutes all EQ bands at once.
RESET button restores all EQ settings to the default values.
COPY/PASTE buttons allow copying EQ settings from one input channel to
another. Note: it is not possible to copy EQ settings from inputs to outputs.
USER MANUAL DSP4X6 Digital Signal Processor 05