Page 1
User DSP4X6 Manual Digital Signal Processor...
Page 2
ON. When the power switch is turned ON, the main power is turned ON. The only operation to disconnect the power supply from the grid, unplug the power cord. USER MANUAL DSP4X6 Digital Signal Processor...
Table of contents Before you start Introduction ..............................2 Features ................................2 Operation Front and rear panels..........................3 Software interface Connecting to device & navigating windows ................4 Audio settings ..............................5 System settings ..............................8 Specifications General specifications ..........................10 USER MANUAL DSP4X6 Digital Signal Processor...
Before you start DSP4X6 – 4 inputs and 6 outputs digital signal processor for line level audio signal processing and routing. Intuitive operation software gives easily understandable access to processing, as well as features factory presets for sound systems containing AMC RF series professional loudspeakers.
Use balanced sound cables. Rear Panel MAINS POWER CONNECTOR Connect device to mains power supply using provided power cable. 1. Balanced signal inputs 2. Balanced signal outputs 3. Power switch 4. Mains power connector USER MANUAL DSP4X6 Digital Signal Processor...
(called Router) and finishes with 6 seconds. The green "connected" indicator (1) will be displayed at the top of the outputs and their dedicated settings. window to indicate ongoing connection. USER MANUAL DSP4X6 Digital Signal Processor...
RESET button restores all EQ settings to the default values. COPY/PASTE buttons allow copying EQ settings from one input channel to another. Note: it is not possible to copy EQ settings from inputs to outputs. USER MANUAL DSP4X6 Digital Signal Processor...
Page 8
DSP4X6 provides flexible input-output matrix for signal routing. Each input channel can be assigned to any outputs, also each output channel can mix multiple inputs. Note: by default setting DSP4X6 inputs are routed as in the DSP4X6 can function as a crossover, with separate settings for each output.
Page 9
RESET button restores all EQ settings to the default values. COPY/PASTE buttons allow copying EQ settings from one input channel to another. Note: it is not possible to copy EQ settings from outputs to inputs. USER MANUAL DSP4X6 Digital Signal Processor...
Click "Export" button in the "Factory" column to export a file, click "Import" to load file from PC. DSP4X6 can save 9 user defined presets in internal memory. DEVICE BOOT PRESET Click a preset button in the "Save" section to enter new preset name and save To select boot preset, select preset from drop-down list.
Page 11
By default DSP4X6 comes with pre-defined presets for various setups for AMC RF series professional loudspeakers. Presets adjust PEQ and crossover settings for AMC loudspeakers RF 10, RF 6, and a subwoofer RFS 12. A “Flat” preset has a PEQ correction to flatten the loudspeaker audio frequency curve, while a “Boost”...