Table of Contents
Advertisement
Software interface
Connecting to device & navigating windows
SOFTWARE DOWNLOAD
Visit www.amcpro.eu software & documents section to download the latest
software for your device.
SYSTEM REQUIREMENTS
The software works with Windows XP / WIN7 / WIN8 / WIN10 x64 or x32
operating system, and can run directly from PC without installation.
CONNECTING TO DEVICE
Connect device to PC using USB type-B cable. Run the DSP46 software on the
computer. The device will automatically connect to the computer within 3-5
seconds. The green "connected" indicator (1) will be displayed at the top of the
window to indicate ongoing connection.
04
USER MANUAL
DSP4X6 Digital Signal Processor
1
6
7
8
9
SWITCHING WINDOWS
The software has four main tabs for audio and device settings. Click on the
tabs "Audio Setting" (2), X-over (3), Router (4) or "System Setting" (5) to switch
window.
NAVIGATING SETTINGS
Click on the parameter to enter its setting window. The selected parameter will
be highlited with different colour.
The user interface follows signal patch starting with settings for each of 4
inputs, visually displayed input/output matrix (called Router) and finishes with 6
outputs and their dedicated settings.
2
3
4
10
11
12
13
5
14
15
Advertisement
Table of Contents
