Setting High Definition Images To The Suitable Screen Size - Toshiba 42HP82 Service Manual

Information
RGB SELECT modes
One of these 6 modes must be selected in order to
display the following signals correctly.
AUTO .............. Select the suitable mode for the
specifications of input signals as
listed in the table "Computer input
signals supported by this system" on
page E-53.
STILL .............. To display VESA standard signals.
(Use this mode for a still image from
a computer.)
MOTION .......... The video signal (from a scan
converter) will be converted to RGB
signals to make the picture more
easily viewable. (Use this mode for a
motion image from a computer.)
WIDE1 ............. When an 852 dot
with a horizontal frequency of
31.7kHz is input, the image may be
compressed horizontally. To prevent
this, set RGB SELECT to WIDE1.
WIDE2 ............. When an 848 dot
with a horizontal frequency of 31.0
kHz is input, the image may be
compressed horizontally. To prevent
this, set RGB SELECT to WIDE2.
DTV ................. Set this mode when watching digital
broadcasting (480P).
See page E-53 for the details of the above settings.
Restoring the factory default settings
Select "RESET" under the function menu. Note that
this also restores other settings to the factory defaults.
Setting high definition images to the suitable
screen size
Use this procedure to set whether the number of vertical
lines of the input high definition image is 1035 or 1080.
Example: Setting the "1080B" mode to "1035I"
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the
press the PROCEED button.
The "OPTIONS" screen appears.
2. Use the
480 line signal
480 line signal
3. To set the HD SELECT mode to "1035I" ...
Use the
The mode switches as follows each time the
button is pressed:
→1080B ↔ 1035I ↔ 1080A ←
4. Once the setting is completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
These 3 modes are not displayed in correct image
automatically.
1080B ............... Standard digital broadcasts
1035I ............... Japanese "High Vision" signal format
1080A ............... Special Digital broadcasts (for
E-36
and buttons to select "OPTIONS", then
and buttons to select "HD SELECT".
O P T I O N S
AUDIO INPUT
: VIDEO1
AUDIO1
: HD/DVD1
AUDIO2
: RGB1
AUDIO3
: RGB
BNC SELECT
: AUTO
RGB SELECT
:
HD SELECT
SEL. ADJ.
and buttons to select "1035I".
O P T I O N S
AUDIO INPUT
: VIDEO1
AUDIO1
: HD/DVD1
AUDIO2
: RGB1
AUDIO3
: RGB
BNC SELECT
: AUTO
RGB SELECT
:
HD SELECT
SEL. ADJ.
HD SELECT modes
example : DTC100)
1080B
EXIT RETURN
or
1035I
EXIT RETURN