Led Indication - Toshiba 32WLG66s Service Manual

D0 (bit0)
OP8
OPT8
D7 (bit7) ~
D3 (bit3)
D2 (bit2) Enable mode that picture mode will be set in
forced when turning the main power on
D1 (bit1) ~ Forced picture mode
D0 (bit0)

LED Indication

The Green and Red LEDs on the TV (at the bottom center of the TV) indicate the TV's
status, as described below.
Red ON (solid) and Green OFF = The TV power cord is plugged in.
Green ON (solid) and Red ON = The On timer is operating.
LED Indication
1 Green LED is OFF;
Red LED blinks continuously at
0.5-second intervals.
2 Green LED is OFF;
Red LED blinks continuously at 1-
second intervals.
file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.056\32W...
FUNCTION DESCRIPTION
- (no use)
Condition
Abnormal operation
Abnormal operation of
BUS line.
Стр. 20 из 21
Value above 100 is no effect.
1 0 (Normal)
-
Enable Disable
(Display the
language only)
0 [dec]: Dynamic (mode-1)
(Normal)
1 [dec]: Standard (mode-2)
2 [dec]: Mild (mode-3)
3 [dec]: Memory (mode-M)
Solution
Turn the TV off and unplug the
power cord.
Plug the power cord in again
and turn the TV on.
Turn the TV off and unplug the
power cord.
Plug the power cord in again
and turn the TV on.
-
02.05.2015