Summary of Contents for Milwaukee M18 FUEL HAMMERVAC FDEX
Page 1
OPERATOR'S MANUAL Cat. No. M18 FDEX, M18 FPDEX M18 FUEL HAMMERVAC 26 MM & 28 MM DEDICATED DUST EXTRACTORS WARNING To reduce the risk of injury, user must read and understand operator's manual.
• Remove any adjusting key or wrench before IMPORTANT SAFETY INSTRUCTIONS turning the power tool on. A wrench or a key left WHEN USING WARNING attached to a rotating part of the power tool may result in personal injury. ELECTRICAL DUST EXTRACTOR, •...
8. Dust box latches as those dust masks that are specially designed to 9. Hammer release button • Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a ® replacement.
Removal and Cleaning of Dust Box and SYMBOLOGY Filter Volts To reduce the risk of injury, when WARNING working in dusty situations, wear Direct Current appropriate respiratory protection or use a Read Operator's Manual suitable dust extraction solution. Keep filter clean.
Page 5
Removing/Installing the Depth Stop Fitting the HAMMERVAC™ to the Tool and Bit To remove the depth stop: Turn OFF the tool. For proper suction and depth Remove the battery pack. control, position the nozzle as- Remove screws from left and right side of rear depth bracket with a philips screwdriver.
Dust Box and Filter" section. tool operation. Return the tool, battery pack, and 2. Install and position the nozzle assembly to the charger to a MILWAUKEE service facility for repair. ® desired side.
Page 8
Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...