Table of Contents
Advertisement
& Media detect count
Allows you to set the number of times to check the presence of media.
ƒ NVMe Configuration
Displays information on your M.2 NVME PCIe SSD if installed.
ƒ SATA And RST Configuration
& SATA Controller(s)
Enables or disables the integrated SATA controllers. (Default: Enabled)
& SATA Mode Selection
Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers
to AHCI mode.
Intel RST Premium With Intel Optane System Acceleration
Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
AHCI
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
& Aggressive LPM Support
Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset
SATA controllers. (Default: Disabled)
& Port 1/2/3/4/5
Enables or disables each SATA port. (Default: Enabled)
& SATA Port 1/2/3/4/5 DevSlp
Allows you to determine whether to let the connected SATA device go into sleep mode. (Default: Disabled)
& Hot plug
Enables or disable the hot plug capability for each SATA port. (Default: Disabled)
& Configured as eSATA
Enables or disables support for external SATA devices.
ƒ Miscellaneous
& LEDs in System Power On State
Allows you to enable or disable motherboard LED lighting when the system is on.
Disables the selected lighting mode when the system is on.
Off
Enables the selected lighting mode when the system is on. (Default)
On
& LEDs in Sleep, Hibernation, and Soft Off States
Allows you to set the lighting mode of the motherboard LEDs in system S3/S4/S5 state.
This item is configurable when LEDs in System Power On State is set to On.
Disables the selected lighting mode when the system enters S3/S4/S5 state. (Default)
Off
Enables the selected lighting mode when the system enters S3/S4/S5 state.
On
& Intel Platform Trust Technology (PTT)
Enables or disables Intel
®
& 3DMark01 Enhancement
Allows you to determine whether to enhance some legacy benchmark performance. (Default: Disabled)
& CPU PCIe Link Speed
Allows you to set the operation mode of the CPU-controlled PCI Express slots to Gen 1, Gen 2, Gen 3, or
Gen 4
. Actual operation mode is subject to the hardware specification of each slot. Auto lets the BIOS
(Note)
automatically configure this setting. (Default: Auto)
(Note) This item is present only when you install a CPU that supports this feature.
PTT Technology. (Default: Disabled)
- 35 -
Enables RAID for the SATA controller.
Advertisement
Table of Contents
