osann Flux Isofi x Manual page 16

Hide thumbs Also See for Flux Isofi x:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 14
EN
WARNING
• Please read through these instructions carefully before use in order to guarantee the safety of
your child. Retain the instructions. Non-compliance with the instructions in this manual may
result in serious injuries to your child.
• The child seat can only be used with its own 5-point harness system for children under a body
weight of 23 kg and a height of up to 105 cm.
• The child seat can NOT be used with the 5-point harness system for children over a body
weight of 23 kg and a height of over 105 cm.
• The child seat can be installed forward-facing with the Isofi x connectors and the top tether strap.
• For Isofi x installation: Be sure to read the car manufacturer's manual.
• Do not use load-bearing contact points other than those described in the instructions and
indicated in the child restraint system.
• Do not use this child car seat at home. It has been designed exclusively for use in a car.
• Do not leave your child unsupervised in the seat at any time.
• The child seat must be replaced if it has been subject to severe mechanical stress in an acci-
dent.
• For safety reasons, the child car seat must be secured in the vehicle even when there is no child
sitting in the child car seat.
• Always make sure that all belts that attach the child car seat to the vehicle are secure and that
all belts that restrain the child are adjusted to fi t the child's body. Ensure that the belts are not
twisted.
• Items of luggage and other objects that could cause injury in the event of a collision must be prop-
erly secured.
• The rigid elements and plastic parts of a child restraint system must be positioned and installed
so that they cannot become jammed by a movable seat or a vehicle door.
• It is important that belts that sit low hold the child's pelvis fi rmly in place. Your child should
always be fastened in to stop them falling out.
• It is dangerous to make changes or additions to the product without approval from the respon-
sible authority. Non-compliance with the installation instructions provided by the manufacturer
of the child restraint system may also present risks to the safety of your child.
• This child seat is designed for children with a maximum height of 150 cm. Never overload the
child seat by transporting more than one child or additional loads in it.
• The child restraint system must not be used without the seat cover.
• The seat cover must not be replaced by a cover other than that recommended by the manu-
facturer, as this seat cover is an important component of the restraint system.
- 16 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lupo isofix

Table of Contents