VALVE TESTER ALFA HT1
AF99999
8 – Place the valve to be tested in a
horizontal position on a soft surface
(cardboard,
cork,
expanded
polyethylene, etc.) and connect the
other end of the cable to it.
Note: It ' s important to connect the
cable carefully and not to force the
connector at any time, so as not to bend
or damage the valve pins or the
connector terminals.
To initiate the test, press the button
in the lower right corner.
Note: If we have selected an incorrect part number we can press the button
in the
lower left corner to return to the previous selection view.
9 – Next, it can be observed 4 verification steps carried out by the tester.
14
v2.0