Directions For Use - Philips 27VM34 U Service Manual

3. Directions for Use

Note : You need not connect the VIDEO IN socket of the TV
Antenna Connection • Connect the aerial plug to the antenna socket ¬on the back cover.
• Insert the mains plug into the wall socket.
Mains Connection• For correct mains voltage, refer to type sticker at the rear of the TV
set • Consult your dealer if mains supply is different.
Switching on the Set • Press the main power button to switch on/off the TV.
• If the set is on standby (indicator is red), press the Power button on the remote
control to switch on set.
Using the Remote Control • Insert the correct type of batteries into the compartment.
• Ensure the batteries are placed in the right direction.
CONNECTING THE AUDIO/VIDEO SOCKETS (PLAYBACK)
The S-Video connection on the rear of the TV is us
the playback of S-VHS VCR tapes, Video Discs,Vid
D isc-Interactive (cd-i) discs. Better picture detail a
the S-Video playback as compared to the picture fr
conn ection.
– Co nnect the S-VIDEO socket on the rear of the T
socket on a S-VHS VCR.
- Connect the AUDIO IN sockets from the rear of t
OUT sockets on the VCR.
if S-VIDEO IN so
You can view the playback of VCR tapes (Video Disc players,
camcorders, etc.) by using the AUDIO and VIDEO INPUT
sockets on the rear of the TV.
Connect the VIDEO and AUDIO IN sockets on the rear of the
TV to the AUDIO and VIDEO OUT sockets on the VCR.
cket is connected.
6--60
-
ed for
eo Games or Compact
nd clarity is possible with
om a normal antenna (RF)
V to the S-V
HS OUT
he TV to the AUDIO