Table of Contents
Advertisement
O W N E R S M A N U A L
STUDIO OPTIONS
The small 1/4 inch plug you see above each of the three XLR input jacks on each channel are for switching when
there is more than one input and no rotary switch. In this case there is a toggle switch for each input channel
directly above the channel input. This eliminates the internal wire that would normally go to the rotary selector
switch. To use the switches you simply engage the one you want to hear on each channel. If you accidentally
engage more than one input on either channel, you will be able to hear both inputs simultaneously.
Decware High Fidelity Engineering Co., East Peoria IL, USA www.decware.com
Advertisement
Table of Contents
