Philips 6002 Series Service Manual page 13

3.2.9 Dismantle lower bracket
1. Use electric screwdriver to dismantle 7pcs Ф3×3mm screws from back plate,and put it at appointed position.
2. Dismantle lower bracket from back plate and put it at appointed position.
Use electric screwdriver to dismantle 1pcs M3×7mm screw and put it at appointed.
3.
Dismantle WIFI board and put it at appointed position.
4.
Take electric screwdriver to dismantle 1pcs Ф3×3mm screws and put them at appointed position.
5.
6. Dismantle WIFI bracket and put it at appointed position
7. After self-check OK,flow it into next station by foot switch
3.2.10 Disassemble hexagon stud
1. Use electric screwdriver to dismantle 8pcs Φ3×2.5×7mm screws,and put them at the appointed position.
2. After self-check OK,flow it into next station by foot switch
13