Philips 6002 Series Service Manual
  1. Manuals
  2. Brands
  3. Philips Manuals
  4. TV
  5. 6002 Series
  6. Service manual
Philips 6002 Series Service Manual

Philips 6002 Series Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
6002
Platform
Chassis name
Model name
MSD6A638
6002
43PUT6002 /56
Published by Yingqun.wen 6002 Quality
Subject to modification
2017-Dec-8
2017 © TP Vision Netherlands B.V.
All rights reserved. Specifications are subject to change without notice. Trademarks are the
property of Koninklijke Philips Electronics N.V. or their respective owners.
TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust
earlier supplies accordingly.
PHILIPS and the PHILIPS' Shield Emblem are used under license from Koninklijke Philips Electronics N.V.

Advertisement

Table of Contents
loading

Related Manuals for Philips 6002 Series

Summary of Contents for Philips 6002 Series

  • Page 1 Koninklijke Philips Electronics N.V. or their respective owners. TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. PHILIPS and the PHILIPS’ Shield Emblem are used under license from Koninklijke Philips Electronics N.V.

  • Page 2: Table Of Contents

    1.Product inforamtion……….……………………………………………………………………………………3 2.Connections overview……..…..…..………………..…………………………………………………………6 3.Mechanical Instructions………………….…………………………………………………………………….7 Cable dressing (43" 6002 series) ……………………………………………………………………7 A s s e m b l y / P a n e l R e m o v a l … … … ............... 7 4.

  • Page 3: Product Inforamtion

    1. Product information Product information is subject to change without notice. For detailed product information，please visit www.philips.com/support 43PUT6002/56 Display Type Diagonal screen size: 42.51inch Display resolution: 3840 x 2160p Input resolution • 800 x 600p - 60 Hz • 1024 x 768p - 60 Hz •...
  • Page 4 Supported media server software (DMS) • You can use any DLNA V1.5 certified media server software (DMS class). • You can use the Philips TV Remote app (iOS and Android) on mobile devices. Performance may vary, depending on the capabilities of the mobile device and the software used.
  • Page 5 DTS Studio Sound DTS 2.0+ Digital out SPL (>= 84dB @ 2m) 78dB @ 2m Acoustic frequence range 160~8K HZ<=16dB ( 160~8K HZ<=16dB) Multimedia Video Playback Formats MPEG-2/MPEG-4 / H.264 H265-up to 4K Subtitles Formats Support SRT 、 ASS Music Playback Formats AC3 ，...

  • Page 6: Connections Overview

    2. Connections Overview Network HDMI...

  • Page 7: Mechanical Instructions

    3. Mechanical Instructions 3.1 Cable dressing CN302 CN203 CN207 J455 CN101 CN101 CN102 CN103 Serial no part description function Back light wire Connect to CN302 Power wire Connect to CN101 LVDS wire J455 to T-CON board Speaker wire CN210 to speaker (yellow black wire) Speaker wire CN202 to speaker (red black wire) two-terminal wire...

  • Page 8: Assembly/Panel Removal

    C0N5、CN1、CN102 to control back light Supply line CON4、CN101 to supply main board WIFI line CN207 to WIFI board Cable dressing( 43" 6002 series) 3.2 Assembly/Panel Removal 3.2.1 Stand removal 1. Remove the fixation screws [1] 4pcs, that secure the stand...
  • Page 9 3.2.2 Disassemble back cover 1. Use electric screwdriver to disassemble Ф3×10mm screw,and put it at appointed position. Figure 1/3 2. Put removed decorative part at the appointed position 3. Use electric screwdriver to dismantle M6*25 P head black zinc plating machine screw,and put it at appointed position. Figure 1 4.
  • Page 10 3.2.4 Dismantle left/right back cover,key module Use electric screwdriver to dismantle 2pcs Ф3×5mm flat head black zinc plating machine screws，and Put at the appointed position. Figure 1 Unplug speaker wire and key wire from the socket of M/B,use cutting nippers to cut off cable tie on the back cover.Then take down rocker switch from back 3.
  • Page 11 3.2.5 Disassemble wire Unplug 2pin power cord from the connector of motherboard and put them at appointed position. 2. Exert appropriate force to unplug backlight wire from the backlight connector of power board. 3. Unplug screen-wire from the socket of driver board,unfasten the buckle of M/B,and unplug screen-wire and put it at appointed position.
  • Page 12 3.2.7 Disassemble base support 1. Use electric screwdriver to dismantle 8pcs Φ4×6mm from back plate and put it at appointed position. 2. Dismantle base support module from back plate and put it at appointed position 3. After self-check OK,flow it into next station by foot switch.
  • Page 13 3.2.9 Dismantle lower bracket 1. Use electric screwdriver to dismantle 7pcs Ф3×3mm screws from back plate,and put it at appointed position. 2. Dismantle lower bracket from back plate and put it at appointed position. Use electric screwdriver to dismantle 1pcs M3×7mm screw and put it at appointed. Dismantle WIFI board and put it at appointed position.
  • Page 14 3.2.9 LCD Panel 1. Remove the SSB as described earlier. 2. Remove the PSU as described earlier. Remove the keyboard control panel as described earlier. Remove the stand bracket as described earlier. Remove the IR/LED as described earlier. Remove the fixations screws that fix the metal clamps to the front bezel. Take out those clamps. Remove all other metal parts not belonging to the panel.

  • Page 15: Fac T Ory Mo Des

    4. Factory Mode Press the following key sequence on a standard RC transmitter: “1999” directly followed by MENU, Purpose To perform extended alignments.  Primary menu Value,remark Factory reset Factory Reset(Press OK Key) Age mode(Press OK Key) Press OK Key Channel presets(Press OK Key) Press OK Key Power On Mode(Press left or right)

  • Page 16: Software Upgrading,Panel Pn

    5. Software Upgrading,Panel PN Software Upgrading 5.1.1 Method 1: The following update is for .bin file. 1. Rename the file to “MstarUpgrade.bin” 2. Prepare a USB memory. 3. Copy the software to USB flash disk(root directory). Method 1: Press [menu+1999 ],enter the factory menu, Choose [main Updates], then press 5.Software update menu will pop up when press confirm key, then select “Yes”...
  • Page 17 5.1.2 Method 2： Copy the software to USB flash disk ,Keep pressing VOL+ key on the machine panel, power on the machine, the standby light flashes quickly after about 5 seconds, standby light extinguish and turn into lighting after about 3 minutes, means that the upgrade is completed.

  • Page 18: Circuit Descriptions

    . Circuit Descriptions 6.1 The 6002S is a new chassis launched in AP in 2016. The whole range is covered by MSD6A638 platform. The major deltas versus its predecessor support DVB-C; DVB-T2, with also USB3.0,WIFI/multi-media, Video out The 6002S chassis comes with the following stylings: series 43PUT6002 /56 ...
  • Page 19 Always replace a defective fuse with one with the correct specifications! This part is available in the regular market. Consult the Philips Service web portal for the order codes of the boards. Important delta’s with the platform are: •...
  • Page 20 6.3 DC/DC Converters The on-board DC/DC converters deliver the following voltages(depending on set execution): • +5V, permanent voltage for the Stand-by Power system • +3V3-STANDBY,voltage for IR/Key board • +12V, input from the power supply for the panel common(active mode) •...
  • Page 21 6.3.2 Power layout SSB 6.4 Front-End Analogue and DVB-C, DVB-T; reception 6.4.1 DVB-C part The Front-End for analogue tuner consist of the following key components: • TUNER EUROPEMXL661 • SCALER MSD6A638 Processor Below find a block diagram of the front-end application for DVB-C part. MXL661 6.4.2 DTB-T2 part The Front-End for DVT part consist of the following key components:...
  • Page 22 MXL661 6.5 HDMI Refer to below for the application. The following HDMI connector can be used: • HDMI 1: HDMI input ( TV digital interface support • HDMI 2: HDMI input ( TV digital interface support HDCP) HDMI3/HDCP1.3) with digital audio/PC DVI input/MHL/CEC with digital audio/PC DVI input/CEC •...
  • Page 23 6.6 Video and Audio Processing - MSD6A638 The MSD6A638 is the main audio and video processor (or System-on-Chip) for this platform. It has the following features: 1. Worldwide multi-standard analog TV demodulator 2. ATSC/DVB-T/DVB-C/DTMB/ISDB-T demodulators 3. UHD@60Hz direct drive 4. Powerful CPU core 5.

  • Page 24: Ic Data Sheet

    7. IC Data Sheets 7.1 MXL661...
  • Page 25 7.2 MSH6110A...
  • Page 26 7.3 TPA3110...

  • Page 28: Circuit Diagrams

    8. Circuit Diagrams Ω Ω Power board circuit diagram NTC7.5_NEW NTC7.5_NEW Plug-in mounting magnetic bead/RH3.5*10*0.8-T/II/Pitch 15mm Ω Ω Ω Ω D205 D205 6A ±20% NTC 6A ±20% NTC R107 R107 discharge needle discharge needle L204 L204 TO220BHD TO220BHD V_BUS L202 L202 discharge needle 10A 600V 10F60UHF...

  • Page 29: Main Board Circuit Diagrams

    Mainboard circuit diagrams MSD6A638-T8E2 (DVB-T/T2/C) Circuit Diagrams VER:A1.0 2016-8-8 PAGE Content Index&History Rev Block Diagram System Power MSD6A638 MSD6A638 POWER LVDS &V by one page Video&VGA&USB&Amplify page HDMI&Ethernet page Tuner &eMCC flash page History Rev Author DATE Description 8/8/2016 Ver:A1.0 First Version Release ZHQING This document for ShenZhen KTC Technology CO., Ltd and presented party internal use only,...
  • Page 30 VB1 4K V by one 3.3V_NORMAL 12V_NORMAL AS1117 RESET TUNER_3.3V 屏电压 SPK-L TUNER PWR Audio AMP AS1117 TPA3110LD2 12V_NORMAL SPK-R MOS管控制 1.28V VDDC_CPU PWR DC-DC 12V_NORMAL 1.15V VDDC PWR DC-DC 5V_NORMAL 3.3V DDR PWR MSB102KT DDR PWR 1.5V 1.2V DC-DC MSD6A638 5V_STANDBY 3.3V_Standby...
  • Page 31 +5V_Normal +5V_Standby VDDC DC/DC Connetor C143 10uF C143 10uF CN101 CN101 12pin/2.0MM 12pin/2.0MM AMS1117L-3.3 AMS1117L-3.3 C147 0.1uF C147 0.1uF PM5V R106 R106 PM5V +12V_Normal Voltage 1.0V H :Power on +5V_Standby 5VSB L :Power off +3.3V_Standby +1.2V_VDDC STANDBY STANDBY R109 R109 +5V_Standby standby PWR-ON/OFF...
  • Page 32 HDMI/MHL VB1/LVDS All I2S trace need to shield GND HDMI1-ARC HDMI1-ARC HDMI1-ARC 8 MST chip HDMI1 HDMI1_RX2P HDMI1-RX2P HDMI1-RX2P 8 HDMI1_RX2N HDMI1-RX2N HDMI1-RX2N 8 HDMI1_RX1P HDMI1-RX1P HDMI1-RX1P 8 BCKM HDMI1_RX1N HDMI1-RX1N BCKM HDMI1-RX1N 8 BCKP HDMI1_RX0P HDMI1-RX0P BCKP HDMI1-RX0P 8 HDMI1_RX0N HDMI1-RX0N HDMI1-RX0N 8...
  • Page 33 Core pwer (The element need close to IC, due to the IC cooler with limited height, the filter capacitor should choose 0603 or 0402 for seal, don't use 0805). Heat Sink Star connection from VDDC DC-DC L211 near DC-DC,C296 near IC Close to MTS IC +1.2V_VDDC 120mil...
  • Page 34 VB1 For CMI LG Sansung &LVDS CMI/LG/BOE 4K2K@60HZ VBY0N VBY0N_C Panel_VCC Panel_VCC_VB1 VBY0P VBY0P_C 10uF/16V 10uF/16V J455 J455 VBY1N VBY1N_C C128 C128 VBY1P VBY1P_C R442 0R/NC R442 0R/NC PWM IN# BL-ADJUST VBY2N VBY2N_C BCKM PWM OUT# BCKM VBY2P VBY2P_C BCKP PWM OUT R444 0R/NC R444 0R/NC...
  • Page 35 CON501 CON501 CN318 USB_4P CN318 USB_4P USB ESD distributed capacity <2pF VGA-Rin 5V_USB1 USB0_D- VGA-Bin USB0_D- 4 VGA-Bin USB0_D+ VGA-Gin VGA-Gin USB0_D+ 4 VGA-Gin VGA-Rin VGA-Rin VGA-Bin D804 D804 D803 D803 SHIELD SHIELD D801 D801 R501 R501 R502 R502 R503 R503 5V_USB2 USB1_D-...
  • Page 36 HDMI1(ARC) CON801 CON801 HDMI1/5V HDMI1/5V HDMI1_RX2P ED4 ESD/NC ED4 ESD/NC DATA2+ DATA2 SHIELD HDMI1_RX2N HDMI1_RX2P HDMI1-RX2P HDMI1-RX2P HDMI1-RX2P HDMI1-RX2P 4 DATA2- HDMI1_RX1P HDMI1-RX2N HDMI1-RX2N R802 R802 DATA1+ R803 R803 R804 R804 HDMI1_RX2N HDMI1-RX2N HDMI1-RX1P HDMI1-RX1P R805 R805 DATA1 SHIELD HDMI1-RX2N 4 HDMI1_RX1N HDMI1_RX1P HDMI1-RX1P...
  • Page 37 DIF IN&OUT +3.3V_TU TUNER POWER TUNER_RESET 4 kick back filter:220nH/47pF 改善ATV水波纹！ TUNER_RESET +5V_Normal_T +3.3V_TU_T Y001 Y001 AS1084-3.3V AS1084-3.3V R907 R907 CON3 CON3 Addr 0xC0 选用 VOUT IF-IN- R905 R905 DIFM DIFM VOUT I2C-SDA 3,4,6,10 C932 C932 C910 C910 16.000MHz 16.000MHz C915 C915 NC/47pF...
  • Page 38 +3.3V AVDD33 VDD33 +1.15V XTAL_IN +3.3V 30pF 30pF Close to Demod. RESETn XTAL-24MHz XTAL-24MHz 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF XTAL_OUT 30pF 30pF Demod_RST Close to Demod. 10uF/6.3V 10uF/6.3V +3.3V D_SCL I2CS_SCL TS_D6...
  • Page 39 IR board and Key board...

  • Page 40: Styling Sheet

    9. Styling Sheet 6002 Series 43"...

This manual is also suitable for:

43put6002/56

Table of Contents