Product Identification And Energizer Description - Nemtek AGRI 80 Instruction Manual

Product Identification and Energizer Description

The Agri 80, Agri 150 and Agri 200 can be identified by the label on the front of the
energizer or by the label on the side of the energizer. The energizer display will also
identify the energizer when it is switched off.
The connections for the DC supply, battery or power supply are located at the bottom of
the energizer. The red terminal is the positive input terminal and the black terminal is the
negative input terminal.
The Fence terminals are on the font of the energizer with the green earth terminal on the
left and the red high voltage output terminal on the right, which normally connects via
the lightning diverter to the fence.
A removable magnetic tag, located at the bottom of the energizer, can be used for
toggling the energizer On/Off by swiping it over the Nemtek tag symbol on the fascia, a
single beep will be heard from the buzzer inside the energizer.
It can also be used for toggling the energizer into Low/High energy mode by holding it
for three seconds over the Nemtek tag symbol on the fascia, a double beep will be heard
when it toggles.
High Voltage
Earth
Terminal
Terminal
9