Advertisement
We are delighted to introduce TheGigRig G3 S pedalboard switching system.
The G3 S functions in exactly the same way as the original G3 with the addition of oled screens to display
preset names next to the footswitches, with the exception of footswitches 1&8. Preset names for these
footswitches can be seen on the main display. The new software also enables you to sync your G3 S to our web
editor for easy MIDI editing and preset naming. Head to thegigrig.com for more details.
We want you to jump right in, so here is what you need to know to get started.
BACK PANEL CONNECTIONS
TOP PANEL
CONNECTIONS
1. Connect your effects to the back panel of G3, SEND from G3 to the effect input and from the output of the
effect to the G3 loop RETURN.
2. Connect your amp(s), PLEASE NOTE if you are only using one amplifier you MUST use OUT1 as this is your
earth/ground. Connect to your second amplifier or channel/DAW using OUT2 as this is isolated and phase
reversible.
3. Connect your tuner to the TUNER/AUX output. Connect any MIDI pedals and REMOTE SWITCHES you want
to use.
4. Connect your power to G3. We recommend using TheGigRig Generator supplied with G3.
PROGRAMING
1. Choose a preset that you wish to programme by pressing a PRESET FOOTSWITCH. It will light up and the
corresponding number will also appear on the LCD screen.
G3S Quickstart Guide V.1 / ©The GigRig Ltd 2023
Advertisement
