Pioneer VSX-9500S Operating Instructions Manual page 12

CONNECTION CHART
le lee
[io etter ne:
los ee wily wll ote!
NOTE:
Be careful not to make the wrong connectios for CONTROL IN/OUT
i
i
|
|
i
(black) and MULTI-ROOM REMOTE IN {green}.
AQ /
{Set-up example] Speakers By,
Remote control unit
| Bed Room | i
Multi-Room Remote
control unit MR-100 (option)
:
ah
a
a
i )
You can operate the main system
by remote control from u different
room in which are installed a
speaker sysiam or monitor TV set
if you also install a Mutti-Room
* For details, see operating remote control unit in that room.
instructions for multi-room
remote control unit MR- 100.
ie y \
| Be AN system {including
VSX-9500S or VSX-7500S )
'| See aaAle
peti A
J Hes
a
By combining a TV set and a VCR for TV tuner}, you can receive FM
simulcast TV programs (stereo TV sound transmitted from an FM radio
station} while viewing the video portion on your TV.
he
2.
Press the POWER switch to the ON position. and turn on the power
to the other components to be used.
Press the TV ANT selector switch to select the TV mode.
* When using a conventional TV set:
Connect RF MODULATOR JA-RF5 (sold separately) to the receiver's
VIDEO OUT TO RF MODULATOR jack, TV and antenna according
to diagram for RF modulator.
Set JA-RF5's TV ANT switch to "VIDEO.""
12
<ARB1173>
OP w
© When using a TV set equipped with a video input terminal ora
monitor TV:
Connect the receiver's VIDEO OUT TO MONITOR TV jack to the
TV {or monitor TV) video input terminal, and be sure to activate the
video input switch of the TV set.
. Select the desired TV program with the TV set.
. Tune in the desired FM simuicast TV program on the receiver.
Adjust the volume and tone controls as desired.