Sd Mode, Ms Mode, Id Mode - Panasonic TH-42LFE6E Service Manual

SD Mode
Select the SD mode by Up/Down button on the remote control at the front page of CAT mode and then press
the Action button on the remote control.
OSD
SD
D4 4B 49 D4 49 4B 4A
Input command
D4 4B 49 4B 4A D4 49
check
D4 4B 49 D4 4B 49
MTBF Parameter WT
TE
Condition
Sensor
To exit the SD mode, press the R button on the remote control.
MS Mode
Select the MS mode by Up/Down button on the remote control at the front page of CAT mode and then press the Mute
button on the remote control more than 3 seconds.
MS
Market select
To exit the MS mode, press the R button on the remote control.
Caution:
Market Select should be set after exchange of A-Board.
Destination number:
Number
0 Japan
1 US(North America)
3 Asia,
Oceania,ME,Africa
18 China
2 EU, Russia
ID Mode
Select the ID mode by Up/Down button on the remote control at the front page of CAT mode and and then press the Mute
button on the remote control more than 3 seconds.
ID
IIC1 IIC2
A H90MEM OK
H51RTC OK
H62TEMP OK
To exit the ID mode, press the R button on the remote control.
21
0
PT
0
+36 61
BL
251
01.00 2 2
Destination
ADC Adjust OK
History of remote control command.
(Factory use).
Cumulative Time for power on condition. (unit :hour)
Counter of power on. (unit :time)
Temperature error ocurred. (unit :time)
Temperature of A-board
Backlight Limit Value
Contrast Automatic Tracking System sensor
Change by Left/Right buttons on the
remote control and press the action button
to confirm.
Present number
EEPROM data version
14