Calibrating The Touch Screen; Adjusting The Stylus Double-Tap Rate - ViewSonic V212 User Manual

C
ALIBRATING THE
If your touch screen is not responding accurately to taps with the stylus, you may need to
recalibrate the screen. To do so:
1. Tap on the control panel's Settings button - the Settings window will open
2. Tap on the General Tab
3. Tap on the Realign Button in the Stylus section
4. Follow the on-screen instructions
5. When finished, tap the screen - the re-calibration is complete
The instructions will ask you to place the stylus on a series of cross-hair target symbols. When
doing so, rather than just tapping the screen, hold the stylus in place for a second or two as
directed until the program responds.
A
DJUSTING THE
The double-tap rate can be set in the Settings window:
1. Tap on the control panel's Settings button - the Settings window will open
2. Tap on the General Tab
3. Double-tap on the checkerboard graphic to set your double tap rate
4. Close the Settings window
To save your user and wireless settings, power-down the unit then resume.
ViewSonic V212/V212X
T S
OUCH CREEN
S D
TYLUS OUBLE
- R
TAP ATE
7