Checking Engine Start System - Bad Boy 550cc Owner's Manual

① Range gear shift lever pivot (spray type grease )

■ Checking engine start system

CAUTION
TO avoid personal injury

Do not allow anyone near the vehicle
while testing.

If the vehicle does not pass the test, do
not operate the vehicle.
◆ Preparation before testing
1. Place all control levers in the "NEUTRAL"
position.
2. Set the parking brake and stop the engine.
◆ Test gear shift range lever safety switch
1. Sit on the operator's seat.
2. Shift the range gear shift lever to: "L", "H",
"N" or REVERSE position.
3. Turn the key to "START" position.
4. The engine must not crank.
5. If it cranks consult your local dealer for
this service.
Periodic Service
Bench seat
① Torque wheel bolts to 80 N.m
To avoid personal injury

Never operate vehicle with loose wheel
bolts.

Any time these bolts are loosened they
should be retightened to the specified
torque.

Check all bolts frequently and keep
them tight.
Check wheel bolts regularly especially when
new. If they are loose tighten to 80 N.m.
10-10
CAUTION