Page 1
Lumiafl ex 1004, 24 Vdc, 10 W/m, 5 m reel, 920 lm/m, 3000 K 46020003 Lumiafl ex 1004, 24 Vdc, 10 W/m, 5 m reel, 1000 lm/m, 4000 K 46020005 Lumiafl ex 1004, 24 Vdc, 10 W/m, 5 m reel, 980 lm/m, 6500 K www.prolumia.com...
Page 2
29.4 mm Light source: LED SMD2835 46020002 3000 CRI: > 90 46020003 4000 1000 Colour consistency: <5 SDCM Lifetime (L70): >60,000 hours 46020005 6500 Electrical safety class: Class III Operating temperature: -20°C ~ +45°C IP rating: IP65 (indoor use only) www.prolumia.com...
Page 3
Align the triangle sign on the led strip with that on the quick connector. Align the led strip with the limit line on the quick connector, Note: The directions of the two triangle signs must be consistent and then press the cover until you hear the click sound. to avoid short circuit. www.prolumia.com...
Page 4
Peel the protective paper from 3M tape. Stick the led strip on the position to be installed and switch on the driver. Check to make sure 3M tape is attached to led strip. Clean the required installation position before installation. www.prolumia.com...
Page 5
Dimensions: 14 x 12.3 x 5 mm INSTALLATION WITH MOUNTING CLIPS Secure the plastic clips to the mounting surface with a screwdriver. Clip the led strip onto the plastic clips and fi x it. The installation is complete. Switch on the driver. www.prolumia.com...
Need help?
Do you have a question about the LUMIAFLEX 1004 and is the answer not in the manual?
Questions and answers