Continental Refrigerator CDI3NEA-1 Installation Manual

Continental Refrigerator CDI3NEA-1 Installation Manual

Gas insert, natural gas/propane

Advertisement

Quick Links

SAFETY INFORMATION
WARNING
!
FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings
exactly could result in serious
injury, death, or property damage.
- Do not store or use gasoline or
other fl ammable vapors and liquids
in the vicinity of this or any other
appliance.
WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch;
do not use any phone in your
building.
• Leave the building immediately.
• Immediately call your gas supplier
from a neighbour's phone. Follow
the gas supplier's instructions.
• If you cannot reach your gas
supplier, call the fi re department.
- Installation and service must be
performed by a qualifi ed installer,
service agency, or the supplier.
This appliance may be installed in an
aftermarket, permanently located,
manufactured home (USA only) or
mobile home, where not prohibited
by local codes.
This appliance is only for use with
the type of gas indicated on the
rating plate. This appliance is not
convertible for use with other gases,
unless a certifi ed kit is used.
INSTALLER:
Leave this manual with the appliance.
CONSUMER:
Retain this manual for future reference.
CSA /
INTERTEK
LOGO
$10.00
ADD MANUAL TITLE
INSTALLATION MANUAL
(MUST use title from Price Book)
NATURAL GAS MODELS: ADD PRODUCT CODE HERE
PROPANE GAS MODELS: ADD PRODUCT CODE HERE
ADD PRODUCT IMAGE
CERTIFIED TO THE CANADIAN AND AMERICAN NATIONAL STANDARDS:
CERTIFIED TO THE CANADIAN AND AMERICAN NATIONAL STANDARDS:
CSA 2.22 AND ANSI Z21.50 FOR VENTED DECORATIVE GAS APPLIANCES
CSA 2.33 AND ANSI Z21.88 FOR VENTED GAS FIREPLACE HEATERS
PLACE BARCODE LABEL ON
IF SEPARATE MANUALS, ADD "PLACE BARCODE
ENGLISH
Gas Insert Series
Product Name / Code
NATURAL GAS MODELS: CDI3NEA-1
PROPANE MODELS: CDI3PEA-1
(CDI3EA-1 illustrated)
ADD ____ ILLUSTRATED
FOR INDOOR USE ONLY
IF INSTALLATION + OPERATION,
ADD SERIAL NUMBER LABEL HERE.
THE OWNER'S MANUAL
LABEL ON THE OWNER'S MANUAL"
W415-3141 / 03.31.22

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CDI3NEA-1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Continental Refrigerator CDI3NEA-1

  • Page 1 Product Name / Code FIRE OR EXPLOSION HAZARD (MUST use title from Price Book) Failure to follow safety warnings NATURAL GAS MODELS: CDI3NEA-1 exactly could result in serious NATURAL GAS MODELS: ADD PRODUCT CODE HERE PROPANE MODELS: CDI3PEA-1 injury, death, or property damage.
  • Page 2 safety information WARNING • This appliance is hot when operated and DANGER can cause severe burns if contacted. • Any changes or alterations to this appliance or its controls can be dangerous and is prohibited. HOT GLASS WILL CAUSE • Do not operate appliance before reading and BURNS.
  • Page 3 safety information WARNING • Do not use a blower insert, heat exchanger insert or other accessory not approved for use with this appliance. • This appliance must not be connected to a chimney fl ue pipe serving a separate solid fuel burning appliance.
  • Page 4: Table Of Contents

    table of contents general information rates and effi ciencies rating plate information shut-off valve dimensions minimum clearance to combustibles installation planning optional non-combustible installation levelling the appliance chimney connection gas installation finishing minimum combustible mantel clearances safety barrier & door removal / installation log placement decorative panels logo placement...
  • Page 5: General Information

    standard checklist Installer: please fi ll out appliance checklist in the owner’s manual. 1.0 general information When the appliance is installed at elevations above 4,500ft (1372m), and in the absence of specifi c recommendations from the local authority having jurisdiction, the certifi ed high altitude input rating shall be reduced at the rate of 4% for each additional 1,000ft (305m).
  • Page 6 general information WARNING • Always light the pilot whether for the fi rst time or if the gas supply has run out, with the glass door opened or removed. • Provide adequate clearance for servicing and operating the appliance. • Provide adequate ventilation.
  • Page 7: Rating Plate Information

    general information rating plate information Certified to Canadian and American National Standards: CSA 2.22-XXXX / ANSI Z21.50-XXXX for Vented Decorative Gas Appliances pliances liances Certifié selon les normes Nationales Canadiennes et Américaines: CSA 2.22-XXXX / ANSI Z21.50-XXXX pour les Appareils à gaz décoratif à évacuation à...
  • Page 8: Dimensions

    general information dimensions front view right side view SAFETY BARRIER top view back view minimum clearance to combustibles This appliance must be recessed into a vented non-combustible wood-burning appliance (prefabricated or masonry) only. The minimum appliance opening size in which the appliance is to be installed is: Height 21"...
  • Page 9: Installation Planning

    2.0 installation planning installation planning WARNING • Risk of fi re! Maintain specifi ed air space clearances to vent pipe and appliance. Clean out ashes from the inside of the wood-burning appliance. Make sure that the chimney and wood-burning appliance are in a clean and sound condition and constructed of non-combustible materials. If necessary have any repair work done by a qualifi...
  • Page 10: Levelling The Appliance

    installation planning levelling the appliance Have an authorized dealer install the appliance. If you install the appliance yourself, have your dealer review your installation plans and/or installation. Draw out a detailed plan of the installation including dimensions and verify the dimensions with the requirements listed in this manual.
  • Page 11: Chimney Connection

    installation planning chimney connection Chimney installation must conform to both national and local code requirements. The chimney must be lined with one 3" (76mm) diameter liner for intake and one 3" (76mm) diameter liner for exhaust. The minimum and maximum vent lengths are 10' (3m) and 45' (14m) respectively.
  • Page 12: Gas Installation

    installation planning We recommend the following method of sealing off the damper area around the liner: Measure the throat of the appliance and mark this shape on a piece of 24 gauge sheet metal (fl ue cover). Cut a 6 3/4"...
  • Page 13: Finishing

    3.0 fi nishing fi nishing WARNING • Risk of fi re! • Never obstruct the front opening of the appliance. • The front of the appliance must be fi nished with any non-combustible materials such as brick, marble, granite, etc., provided that these materials do not go below the specifi ed dimension, as illustrated. •...
  • Page 14: Safety Barrier & Door Removal / Installation

    fi nishing safety barrier & door removal / installation WARNING • Glass may be hot. Do not touch glass until cooled. • If equipped with door latches that are part of a safety system, they must be properly engaged. Do not operate the appliance with latches disengaged.
  • Page 15: Log Placement

    fi nishing log placement WARNING • Failure to position the logs in accordance with these diagrams or failure to use only logs specifi cally approved with this appliance may result in property damage or personal injury. • Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since appliance may not function properly and delayed ignition may occur.
  • Page 16 fi nishing Pilot Shield Notch Place log #1 snug against the back wall, Place the two holes in log #3 on A1 and A2. Do PLACE TEXT BOX HERE. PLACE TEXT BOX HERE. ensuring the notch fi ts around the pilot shield. not cover any burner ports.
  • Page 17: Decorative Panels

    fi nishing Place log #7 along the centre of the lower Place log #8 along the right side of the lower PLACE TEXT BOX HERE. PLACE TEXT BOX HERE. media tray. media tray. NOTE: ENSURE NOMENCLATURE IS NOTE: ENSURE NOMENCLATURE IS note: CONSISTENT THROUGHOUT.
  • Page 18: Logo Placement

    fi nishing logo placement 1/2"(12.7mm) Remove the backing of the logo supplied and place, as illustrated. LOGO 1/2"(12.7mm) glowing embers WARNING • Completely blocking the burner ports can cause an incorrect fl ame pattern, carbon deposits and delayed ignition. Tear the embers into pieces and loosely layer above the burner ports covering the burner area. Care should be taken to shred the embers into thin, small irregular pieces as only the exposed edges of the fi...
  • Page 19: Bracket Installation For Optional Cf45/60 Receiver

    fi nishing bracket installation for optional CF45/60 receiver 1. Remove the safety barrier and glass door (see "safety barrier & door removal / installation" section). 2. Remove the 1 screw holding the bracket in place (Fig. 3-5). Lift the bracket up and out of the slots, lifting it through the opening between the fi...
  • Page 20: Electrical Information

    4.0 electrical information wiring diagram WARNING • Do not wire 110 volts to the valve or wall switch. ILOT SSEMBLY W010-3037 (NG) GNITION W010-3040 (P) ODULE W190-0135 3/16” ROUND ILOT 1/4” ATTERY MAIN OLDER PILOT W350-0342 URNER WITCH ALVE ATTERY W725-0104 (NG) W725-0105 (P) ELAY...
  • Page 21: Operation

    5.0 operation WARNING • If you do not follow these instructions exactly, a fi re or explosion may result causing property damage, personal injury, or loss of life. • If applicable, always light the pilot whether for the fi rst time or if the gas supply has run out with the glass door opened or removed.
  • Page 22: Adjustments

    6.0 adjustments check pressure readings Inlet pressure can be checked by turning screw (A) counter- 3/8” - 1/2” clockwise 2 or 3 turns and then placing pressure gauge tubing (9.5mm - 12.7mm) over the test point. Gauge should read as described on the chart below.
  • Page 23: Venturi Adjustment

    adjustments venturi adjustment This appliance has an air shutter that has been factory set open according to the chart below: VENTURI Regardless of venturi orientation, closing the air shutter will cause a more BURNER yellow flame, but can lead to carbonization. Opening the air shutter will cause a more blue flame, but can cause flame lifting from the burner ports.
  • Page 24: Maintenance

    7.0 maintenance WARNING • Turn off the gas and electrical power before servicing the appliance. • Appliance may be hot. Do not service until appliance has cooled. • Do not use abrasive cleaners on glass. • Do not paint the pilot assembly. This appliance and its venting system should be inspected before use and at least annually by a qualifi...
  • Page 25: Annual Maintenance

    maintenance annual maintenance WARNING • Annual maintenance should be performed by a qualifi ed service technician • The fi rebox becomes very hot during operation. Let the appliance cool completely or wear heat resistant gloves before conducting service. • Never vacuum hot embers. •...
  • Page 26: Care Of Plated Parts

    maintenance care of plated parts If the appliance is equipped with plated parts, you must clean fi ngerprints or other marks from the plated surfaces before operating the appliance for the fi rst time. Use an ammonia-free or vinegar-based cleaner and a towel to clean.
  • Page 27: Restricting Vertical Vents

    maintenance restricting vertical vents Your appliance comes with restrictor plate fully closed. If carboning becomes an issue, adjust the restrictor plate by loosening the four screws and pulling the plate forwards or backwards (Fig. 7-2). Re-tighten the screws. Restrictor Plate Screws Fig.
  • Page 28: Accessing The Blower For Service (If Equipped)

    maintenance accessing the blower for service (if equipped) Remove safety barrier and glass door (see "safety barrier & door removal / installation" section). Remove media tray (see "media tray installation" section) and burners. Remove porcelain radiant panels (PRPs) or brick panels (if applicable). Remove the fi...
  • Page 29: Replacement Parts

    8.0 replacement parts WARNING • Failure to position the parts in accordance with this manual or failure to use only parts specifi cally approved with this appliance may result in property damage or personal injury. Contact your dealer for questions concerning prices and policies on replacement parts. Normally, all parts can be ordered through your Authorized dealer / distributor.
  • Page 30: Overview

    replacement parts W415-3141 / 03.31.22...
  • Page 31: Right Side Access Plate Assembly

    replacement parts W415-3141 / 03.31.22...
  • Page 32: Valve Train Assembly

    replacement parts W415-3141 / 03.31.22...
  • Page 33: Troubleshooting

    troubleshooting WARNING • Always light the pilot whether for the fi rst time or if the gas supply has run out, with the glass door open or removed. • Turn off gas and electrical power before servicing the appliance. • Appliance may be hot.
  • Page 34 troubleshooting symptom problem test solution Pilot will not light. Makes Wiring: short, loose, or damaged Verify the thermocouple/sensor is clean and the wiring is undamaged. Verify the interrupter block is not damaged or too tight. Verify noise with no spark at connections connections from pilot assembly are tight;...
  • Page 35 troubleshooting symptom problem test solution Lights or blower Control module switch in Verify ON/OFF switch is in the “I” position which denotes on. won’t function (if wrong position. equipped). COM switch is unplugged. Verify “COM” switch is plugged into the front of the control module.
  • Page 36: Warranty

    10.0 warranty Continental® products are manufactured under the strict standard of the world recognized ISO 9001 : 2015 Quality Management System. Continental® products are designed with superior components and materials assembled by trained craftsmen who take great pride in their work. The burner and valve assembly are leak and test-fi red at a quality test station. The complete appliance is again thoroughly inspected by a qualifi...

This manual is also suitable for:

Cdi3pea-1

Table of Contents