Download
Share
Print this page
  1. Manuals
  2. Brands
  3. National Manuals
  4. Electric Shaver
  5. ES8016-A3
  6. Service manual

National ES8016-A3 Service Manual

Ac/rechargeable shaver
Hide thumbs

Advertisement

Quick Links

Download this manual
SPECIFICATIONS
Power source
Power consumption
Motor voltage
Charging time
Shaves per charge
Measurement
Weight
Supplied accessories
CONTENTS
AC/Rechargeable Shaver
ES8016-A3
ES8017-A3
AC 100-240V, 50-60Hz (Automatic voltage conversion)
7W
24V DC
1 Hour
14 times (3 minutes shave)
(H)15 x (W)6.1 x (D)3.7 cm
220g
Soft case
Cleaning brush
Charging stand
Page
2
2
3
© 2003 Matsushita Electric Works, Ltd. All rights
reserved. Unauthorized copying and distribution is a
violation of law.
ORDER NO. SD0304A38C3
Page
6
8
10

Advertisement

loading

Related Manuals for National ES8016-A3

Summary of Contents for National ES8016-A3

  • Page 1: Table Of Contents

    ORDER NO. SD0304A38C3 AC/Rechargeable Shaver ES8016-A3 ES8017-A3 SPECIFICATIONS Power source AC 100-240V, 50-60Hz (Automatic voltage conversion) Power consumption Motor voltage 24V DC Charging time 1 Hour Shaves per charge 14 times (3 minutes shave) Measurement (H)15 x (W)6.1 x (D)3.7 cm...

  • Page 2: Schematic Diagram

    ES8016-A3 / ES8017-A3 1 SCHEMATIC DIAGRAM 2 WIRING CONNECTION DIAGRAM...

  • Page 3: Disassembly Instructions

    ES8016-A3 / ES8017-A3 3 DISASSEMBLY INSTRUCTIONS Follow the procedure below to disassemble the main unit. 1. Remove the cap, the outer foil with foil frame and the inner blade. 2. To remove the trimmer driving bar or the slit blade driving bar, press bars outward.
  • Page 4 ES8016-A3 / ES8017-A3 4. Remove trimmer and trimmer handle. 5. Loosen two screws and the retaining plate. Remove the waterproof rubber. 6. Remove the four screw caps using something like a toothpick and four screws. 7. Loosen a screw and remove the bottom cover.
  • Page 5 ES8016-A3 / ES8017-A3 9. Take out the rechargeable batteries. 10. Take out the linear motor and module assembly from housing A. Remove the plug chassis.

  • Page 6: Caution In Assembly

    ES8016-A3 / ES8017-A3 4 CAUTION IN ASSEMBLY NOTE: When reassembling, replace the new waterproof rubber. Make sure whether there is NO foreign substance sticking around a part covered with waterproof seal. 4.1. Linear motor and Module assembly Set from the plug chassis side inserting terminal pins in, and insert the driving heads side into housing A.
  • Page 7 ES8016-A3 / ES8017-A3 4.4. Waterproof rubber The waterproof rubber must be fitted the right way around. Install as shown in figure by inserting firmly to the proper position. Make sure to replace both retaining plate and waterproof rubber together when replacing one of each.

  • Page 8: Troubleshooting Guide

    ES8016-A3 / ES8017-A3 5 TROUBLESHOOTING GUIDE (Refer to WIRING CONNECTION DIAGRAM) <TROUBLE> <CHECK.> <REMEDY> Motor does not rotate. <CHECK POWER CORD.> NO Replace power cord unit. → → → → Connect the rated voltage to the normal main unit of empty charge capacity →...
  • Page 9 ES8016-A3 / ES8017-A3 <TROUBLE> <CHECK.> <REMEDY> Noise is too loud. → Check if there any deformation with the outer foil. NO Replace the outer foil or → → → → oiling a drop for the foil. Amplitude is too large.

  • Page 10: Exploded View & Replacement Parts List

    ES8016-A3 / ES8017-A3 6 EXPLODED VIEW & REPLACEMENT PARTS LIST 6.1. EXPLODED VIEW for ES8016 6.2. REPLACEMENT PARTS LIST for ES8016 NOTE: *A=available as an optional accessory *B=only available as set *C=available individually Ref. No. Part No. Part Name & Description...
  • Page 11 ES8016-A3 / ES8017-A3 6.3. EXPLODED VIEW for ES8017 6.4. REPLACEMENT PARTS LIST for ES8017 NOTE: *A=available as an optional accessory *B=only available as set *C=available individually Ref. No. Part No. Part Name & Description Remarks Per Unit WES8017X7159 PROTECTIVE CAP...

This manual is also suitable for:

Es8017-a3