Oppo Reno 10 Pro 5G User Manual page 108

106
https://www.softbank.jp/mobile/support/sar/
* The technical regulations are provided in Article 14-2 of the
Radio Equipment Regulations, a Ministerial Ordinance of the
Radio Act.
** Including other radio systems that can be simultaneously
used with 5G/LTE/3G (or LTE/3G or 3G).
European RF Exposure Information
This mobile phone 【A302OP】 is a radio transmitter and
receiver. It is designed not to exceed the limits for exposure
to radio waves recommended by the international guidelines.
The guidelines were developed by the International Commission
on Non-Ionizing Radiation Protection (ICNIRP) and include
safety margins designed to assure the protection of all
persons, regardless of age and health conditions. The
guidelines use a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit for mobile phones
is 2.0 W/kg. The highest SAR value for this mobile phone
when tested for use near head is 0.935 W/kg*, and that when
worn on the body at the separation distance of 0.5 cm from
the body is 0.95 W/kg*. For electronic safety, maintain the
separation distance with accessories containing no metal,
that position handset a minimum of the above distance. Use
of other accessories may not ensure compliance with the
guidelines.
* The tests are carried out in accordance with the
international guidelines for testing.
Simplified Declaration of Conformity for 【A302OP】
Hereby, OPPO declares that the radio equipment type
【A302OP】 is in compliance with Directive 2014/53/EU. The
full text of the EU declaration of conformity is available at
the following internet address:
certification/.
(Japanese)
https://www.oppo.com/en/
FCC RF Exposure Information
This mobile phone 【A302OP】 is a radio transmitter and
receiver. It is designed and manufactured not to exceed the
emission limit for exposure to radio frequency (RF) energy
required by the Federal Communications Commission (FCC).
The limit is based on standards that were developed by
independent scientific organizations through periodic and
thorough evaluation of scientific studies. The standards
include a substantial safety margin designed to assure the
safety of all persons, regardless of age and health conditions.
The exposure standard for mobile phones employs a unit of
measurement known as the Specific Absorption Rate (SAR).
The SAR limit set by the FCC is 1.6 W/kg. The tests are
performed in positions and locations as required by the FCC.
The highest SAR value for this handset when tested for use
near the head is 0.96 W/kg, and that when worn on the body
as shown below is 0.23 W/kg.
Body-worn Operation: This mobile phone was tested for
typical body-worn operations with the separation distance
of 1.5 cm from the body. To maintain compliance with FCC
RF exposure requirements, use accessories that maintain
the above separation distance between the user's body and
the mobile phone. The use of beltclips, holsters and similar
accessories should not contain metallic components in its
assembly.
The use of accessories that do not satisfy these requirements
may not comply with the FCC RF exposure requirements and
should be avoided.
The FCC has granted an equipment authorization for this
mobile phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure requirements. Filed SAR
information of this mobile phone can be found by searching
FCC ID R9C-AC078 in the FCC ID Search webpage:
www.fcc.gov/oet/ea/fccid.
Additional information on SAR can be found on the FCC
website at https://www.fcc.gov/general/radio-frequency-
safety-0.
https://