Material List - Oppo Reno 10 Pro 5G User Manual

98
Handset Use & Electronic Medical
Equipment
Persons with an implanted pacemaker or
defibrillator should keep handset at least 15
cm away from the device.
Handset radio waves may affect implanted pacemakers or
defibrillators.
When using electronic medical equipment
(other than implanted cardiac pacemakers/
defibrillators) outside medical facilities, check
with the equipment vendor or distributor for
information about the effects of radio waves.
Handset radio waves may affect electronic medical
equipment.
Disable handset transmissions (e.g. airplane
mode) or power off handset when it is difficult
to keep a distance of at least 15 cm away from
others such as in a crowd.
There may be someone who is wearing an implanted
pacemaker or defibrillator. Handset radio waves may
interfere with implanted pacemakers or defibrillators
causing such devices to malfunction.
Observe each medical facility's instruction
when using handset.
Handset radio waves may affect electronic medical
equipment.

Material List

OPPO Reno10 Pro 5G Main Unit
Part Material/Surface Treatment
Display Strengthened glass/AF coating
Protective Polyethylene terephthalate, silicone
Film adhesive/-
Exterior Case
PMMA/hard coating
(Top)
Exterior Case
PC + 20% GF/NCVM
(Bottom/side)
Back Cover
Strengthened glass/etching + AF coating
(Silver gray)
Back Cover
(Glossy Strengthened glass/polish + AF coating
purple)
Camera Panel
Strengthened glass/etching + AF coating
(Top/bottom)
Camera Panel
Decorative Stainless steel/PVD
Panel (Top)
Back Cover
(Camera/Flash Aluminum/etching + anodizing
Light part)
Flash Light PMMA/-
Infrared
PMMA/-
Transmitter
Power Key/
Screen Lock Aluminum/anodizing
Key
Volume Key
Aluminum/anodizing
(Up/Down)
SIM Card
Tray PC + 20% GF/NCVM
(exterior)
SIM Card
Tray (card
PC + 20% GF, SUS301/-
placement
frame)
SIM Card
Silicone/-
Tray (seal)
IMEI Label,
Protective
Polyethylene terephthalate/laminated
Sheet (under
IMEI label)
AC Charger (Complementary Sample)
Part Material/Surface Treatment
Exterior Case PC/-
Power Plug Copper alloy/nickel plating